HUBBELL WIRING DEVICE-KELLEMS Straight Plastic Cable Grip
The Hubbell Wiring Device-Kellems SECP11BA is a straight nylon liquid-tight cord connector with a PG11 male box connection, accepting cord diameters from 0.23 in to 0.40 in. Rated IP66, this 1 1/2 in overall length…
SKU 3G-OTH-723104
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The Hubbell Wiring Device-Kellems SECP11BA is a straight nylon liquid-tight cord connector with a PG11 male box connection, accepting cord diameters from 0.23 in to 0.40 in. Rated IP66, this 1 1/2 in overall length connector is not rated for hazardous locations and comes without a color-coded grommet.
Frequently Asked Questions
What is the Hubbell SECP11BA liquid tight cord connector used for?
The Hubbell SECP11BA is a straight nylon cord connector used to seal and strain-relieve electrical cables entering a junction box or panel. It is suitable for industrial environments requiring IP66 protection against dust and water jets, such as machining, material handling, and HVAC applications.
What are the specifications of the Hubbell SECP11BA cord connector?
The SECP11BA has a PG11 male box connection, accepts cord diameters from 0.23 in to 0.40 in, and is 1 1/2 in overall length. It is made of black nylon, rated IP66, and is not rated for hazardous locations. It has no color-coded grommet and uses PG thread type.
Where to buy the Hubbell SECP11BA cord connector worldwide?
3G Electric supplies the Hubbell SECP11BA liquid tight cord connector to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source genuine Hubbell Wiring Device-Kellems parts and support procurement across 14 industrial departments.
How to install the Hubbell SECP11BA liquid tight cord connector?
To install the SECP11BA, first pass the cable through the connector body and compression nut. Tighten the PG11 male thread into the box knockout using a locknut. Then pull the cable back and tighten the compression nut to seal the grommet around the cord. Ensure the IP66 seal is maintained.
Used in
Common applications for HUBBELL WIRING DEVICE-KELLEMSHUBBELL WIRING DEVICE-KELLEMS Products
3G Electric supplies HUBBELL WIRING DEVICE-KELLEMS straight plastic cable grips. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
