ICOM BC213NAC Single Unit Charger for F1000 Series
The ICOM Single Unit Charger (MPN BC213NAC) is a charger compatible with ICOM F1000 series radios. This single unit charger is designed to fit select ICOM radio models including the F1000 series.
SKU 3G-OTH-385042
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The ICOM Single Unit Charger (MPN BC213NAC) is a charger compatible with ICOM F1000 series radios. This single unit charger is designed to fit select ICOM radio models including the F1000 series.
Frequently Asked Questions
What is the ICOM BC213NAC single unit charger used for?
The ICOM BC213NAC single unit charger is designed to recharge batteries for ICOM F1000 series radios and compatible models including A16, A16E, F1100D, F2000, F2100D, T10, U88, V10MR, and V88 series. It provides a dedicated charging solution for field or base station use.
What are the specifications of the ICOM BC213NAC charger?
The ICOM BC213NAC is a single unit charger with manufacturer part number BC213NAC. It is compatible with ICOM F1000 series radios and also fits A16, A16E, F1100D, F2000, F2100D, T10, U88, V10MR, and V88 series. The brand is ICOM and product type is single unit charger.
Where to buy the ICOM BC213NAC charger worldwide?
3G Electric supplies the ICOM BC213NAC single unit charger worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to deliver this charger to your location. Contact us for availability and lead time on orders.
How to select the right ICOM charger for my radio?
To select the correct ICOM charger, verify your radio model matches the compatible series listed for the BC213NAC: F1000, A16, A16E, F1100D, F2000, F2100D, T10, U88, V10MR, or V88. Using the wrong charger may damage the battery or radio. Always confirm the manufacturer part number matches your equipment.
Used in
Common applications for ICOMICOM Products
3G Electric supplies ICOM icom-compatible chargers & power cords. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
You might also need
Related products
- MI-T-M Replacement power cord for pressure washers. 40-foot length provides extended reach for outdoor cleaning tasks. Compatible with model HHD-3005-0E9G and part numbers 1RM78/2GXL1
- MI-T-M This 1 ft overall length cord is constructed from copper and plastic. It is a replacement cord for pressure washers and similar equipment, compatible with manufacturer model number CA-3004-0E2G-W. Used for connecting power or control circuits in maintenance and repair applications
- MI-T-M GFCI Ground-fault circuit-interrupter cord with 37 ft overall length. Constructed from steel, brass, and plastic. Compatible with MI-T-M HSE-2003-0MM11 model. Used to provide electrical shock protection for pressure washers and other powered equipment in wet or outdoor environments
- MI-T-M Replacement cord for MI-T-M pressure washer model CM-1400-OMEC. Constructed from steel, copper, plastic, and rubber. Used to connect power or control signals for operation
- MI-T-M This air tank is a replacement component for air compressor systems, designed to store compressed air for consistent delivery. It supports applications such as pneumatic tools, spray painting, and material handling
- MI-T-M This 40 ft cord is constructed with copper and plastic. It is designed as an accessory for use with MI-T-M pressure washer model CW-2405-4ME1/3. Commonly used to connect the pressure washer to a power source or control system in industrial cleaning applications