IDEAL 30-382J Push-In Luminaire Disconnect, 2 Pole
The IDEAL Ballast Disconnects: 2 Pole (MPN 30-382J) are push-in luminaire disconnects with a plug-to-socket connection. They feature a male/female design, copper contacts, and a nylon housing with a V-0 flammability…
SKU 3G-OTH-129826
Also listed as: 30382J · 30 382J
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The IDEAL Ballast Disconnects: 2 Pole (MPN 30-382J) are push-in luminaire disconnects with a plug-to-socket connection. They feature a male/female design, copper contacts, and a nylon housing with a V-0 flammability rating. The product accepts 18 AWG to 12 AWG wire on both the ballast and line sides, and is UL 2459 listed.
Frequently Asked Questions
What is the IDEAL 30-382J ballast disconnect used for?
The IDEAL 30-382J is a push-in luminaire disconnect used in commercial and industrial lighting fixtures to safely isolate ballasts during maintenance or replacement. It provides a plug-to-socket connection with male/female contacts, allowing quick disconnection without rewiring. This UL 2459 listed device is suitable for 18 AWG to 12 AWG copper wire on both ballast and line sides.
What are the specifications of the IDEAL 30-382J?
The IDEAL 30-382J is a 2-pole push-in luminaire disconnect with a nylon housing rated V-0 for flammability. It accepts 18 AWG to 12 AWG copper wire on both ballast and line sides. The connection type is plug to socket with male/female contacts. It is UL 2459 listed and manufactured by IDEAL.
Where to buy IDEAL 30-382J worldwide?
You can source the IDEAL 30-382J ballast disconnect through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time. 3G Electric supplies genuine IDEAL components for lighting applications.
How to install the IDEAL 30-382J push-in disconnect?
To install the IDEAL 30-382J, strip 10-12 mm of insulation from 18 AWG to 12 AWG copper wire. Insert the wire into the push-in terminal on the ballast side until seated. Repeat for the line side. Connect the plug to the socket until it clicks. Ensure the disconnect is properly aligned and secured before energizing the circuit.
Used in
Common applications for IDEALIDEAL Products
3G Electric supplies IDEAL push-in luminaire disconnects. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.