INSIZE ISR-RS528X Surface Roughness Reference Specimen, Electroformed, 0.5 µm
The INSIZE Surface Roughness Specimen (SKU ISR-RS528X, MPN ISR-RS528X) is a reference specimen for surface roughness testers. It is electroformed from nickel and features a roughness value of 20 uin/0.5 micron (0.5…
SKU 3G-OTH-250612
Also listed as: ISRRS528X · ISR RS528X
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Compliance & shipping
- Hazardous material
- Not classified as hazardous
- California Prop 65 warning
- No warning recorded
- Licence required
- No licence required
- Safety Data Sheet
- Not available
- Special shipping
- Ships under standard freight
Need installation or engineering help?
Ask a question
Product Description
The INSIZE Surface Roughness Specimen (SKU ISR-RS528X, MPN ISR-RS528X) is a reference specimen for surface roughness testers. It is electroformed from nickel and features a roughness value of 20 uin/0.5 micron (0.5 micron).
Frequently Asked Questions
What is the INSIZE Surface Roughness Specimen used for?
The INSIZE Surface Roughness Specimen (MPN ISR-RS528X) is a reference standard used to calibrate and verify the accuracy of surface roughness testers. It is commonly employed in quality control and metrology labs to ensure consistent surface finish measurements across manufacturing processes.
What are the specifications of the INSIZE Surface Roughness Specimen?
The INSIZE Surface Roughness Specimen (SKU 3G-OTH-250612) is electroformed from nickel with a roughness value of 20 uin/0.5 micron (0.5 micron). It is manufactured by INSIZE and is designed as a reference specimen for surface roughness testers.
Where to buy the INSIZE Surface Roughness Specimen worldwide?
You can source the INSIZE Surface Roughness Specimen (MPN ISR-RS528X) worldwide through 3G Electric. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time.
How to use the INSIZE Surface Roughness Specimen for calibration?
To calibrate a surface roughness tester, place the INSIZE specimen (20 uin/0.5 micron) under the probe and run a measurement cycle. Compare the reading to the stated value. If deviation exceeds tolerance, adjust the tester per the manufacturer's instructions. Repeat with multiple specimens for verification.
Used in
Common applications for INSIZEINSIZE Products
3G Electric supplies INSIZE surface roughness tester reference specimens. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.