JACO Male Compression Connector: 3/8 in OD x 1/2 in MNPT, 220 psi, White
The JACO Male Compression Connector (MPN 10-6-8-C-PG) is an acetal copolymer tube fitting designed for 3/8 in OD tubing with a 1/2 in MNPT connection, rated at 220 psi. This white connector is USDA Listed, ensuring…
SKU 3G-OTH-742448
Also listed as: 1068CPG · 10 6 8 C PG
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The JACO Male Compression Connector (MPN 10-6-8-C-PG) is an acetal copolymer tube fitting designed for 3/8 in OD tubing with a 1/2 in MNPT connection, rated at 220 psi. This white connector is USDA Listed, ensuring compliance for food-grade applications. 3G Electric interprets your demand and sources this genuine industrial fitting across 14 departments, with specialist expertise in pumps and controls to support your system integration.
Frequently Asked Questions
What is a JACO male compression connector used for?
A JACO male compression connector connects 3/8 in OD tubing to a 1/2 in male NPT threaded port, creating a leak-resistant seal. It is commonly used in food-grade fluid systems, pneumatic lines, and low-pressure water applications where acetal copolymer's chemical resistance and USDA listing are required.
What are the specifications of the JACO 10-6-8-C-PG connector?
The JACO 10-6-8-C-PG is a male compression connector for 3/8 in OD tubing with a 1/2 in MNPT thread. It is rated at 220 psi, made of white acetal copolymer, and USDA Listed for food-contact use. 3G Electric supplies this genuine fitting across 14 industrial departments.
Where to buy JACO compression fittings in worldwide?
3G Electric supplies JACO compression fittings worldwide, handling full logistics and customs clearance. As a global industrial solutions provider, we source genuine parts like the 10-6-8-C-PG across 14 departments, with specialist support for pumps and controls to ensure your system integration is seamless.
How to install a JACO acetal copolymer compression fitting?
To install a JACO acetal copolymer compression fitting, cut tubing squarely, deburr the end, and slide the nut and ferrule onto the tube. Insert the tube fully into the connector body, then hand-tighten the nut plus 1/4 to 1/2 turn with a wrench. Avoid over-tightening to prevent cracking the acetal material.
Used in
Common applications for JACOJACO Products
3G Electric supplies JACO acetal copolymer tube fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
