JONARD TOOLS FPL-5050 Fiber Optic Power Meter and Light Source Kit
The JONARD TOOLS Fiber Optic Power Meter: Single-Mode (MPN FPL-5050) is a Light Source Power Meter Kit for optical power loss testing. It includes the FPM-50A Power Meter and FLS-50 Light Source, with a wavelength…
SKU 3G-OTH-183742
Also listed as: FPL5050 · FPL 5050
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The JONARD TOOLS Fiber Optic Power Meter: Single-Mode (MPN FPL-5050) is a Light Source Power Meter Kit for optical power loss testing. It includes the FPM-50A Power Meter and FLS-50 Light Source, with a wavelength range of 800 to 1700 nm for the power meter. The kit features four modulation outputs (CW, 270 Hz, 1 KHz, 2 KHz), includes FC adapters and two cleaning swabs, and supports single-mode fiber.
Frequently Asked Questions
What is the JONARD TOOLS FPL-5050 fiber optic power meter used for?
The JONARD TOOLS FPL-5050 kit is used for optical power loss testing on single-mode fiber networks. It combines the FPM-50A power meter and FLS-50 light source to measure signal attenuation, helping technicians verify splice and connector quality in telecom and data center installations.
What are the specifications of the JONARD TOOLS FPL-5050?
The FPL-5050 kit includes a power meter with a wavelength range of 800 to 1700 nm and a light source with four modulation outputs: CW, 270 Hz, 1 KHz, and 2 KHz. It supports single-mode fiber, includes FC adapters and two cleaning swabs, and is manufactured by JONARD TOOLS.
Where to buy the JONARD TOOLS FPL-5050 worldwide?
You can source the JONARD TOOLS FPL-5050 through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations, ensuring the kit reaches your facility without hassle.
How to use the JONARD TOOLS FPL-5050 for optical power loss testing?
Connect the FLS-50 light source to the fiber under test using the included FC adapter, select a modulation output (e.g., 1 KHz), and read the power level on the FPM-50A meter. Compare the reading to the source output to calculate loss. Clean connectors with the included swabs before each test.
Used in
Common applications for JONARD TOOLSJONARD TOOLS Products
3G Electric supplies JONARD TOOLS optical power meters & kits for loss testing. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.