JW WINCO M14x1.5 Carbon Steel Black Oxide Thread-Locking Bearing Locknut
The JW WINCO Bearing Locknut: Set Screws is a thread-locking bearing locknut made of carbon steel with a black oxide finish. It features an M14x1.50 bore thread size and uses M4 set screws for secure locking. This…
SKU 3G-OTH-202204
Also listed as: 18042M14X15ST · 1804 2 M14X1 5 ST · 1804-2-M14X1-5-ST
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The JW WINCO Bearing Locknut: Set Screws is a thread-locking bearing locknut made of carbon steel with a black oxide finish. It features an M14x1.50 bore thread size and uses M4 set screws for secure locking. This product is identified by manufacturer part number 1804.2-M14X1.5-ST.
Frequently Asked Questions
What is a JW WINCO bearing locknut used for?
A JW WINCO bearing locknut secures bearings onto shafts in industrial machinery. It prevents loosening under vibration and axial loads, commonly used in conveyors, pumps, and gearboxes. The M14x1.50 thread and M4 set screws provide a positive lock without additional hardware.
What are the specifications of the JW WINCO bearing locknut 1804.2-M14X1.5-ST?
This JW WINCO locknut has an M14x1.50 bore thread size, is made of carbon steel with a black oxide finish, and uses M4 set screws for locking. The manufacturer part number is 1804.2-M14X1.5-ST. It is designed for thread-locking bearing applications requiring secure fastening.
Where to buy JW WINCO bearing locknuts worldwide?
3G Electric supplies JW WINCO bearing locknuts worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time on the M14x1.50 locknut model 1804.2-M14X1.5-ST.
How to install a JW WINCO bearing locknut with set screws?
To install, thread the locknut onto the shaft by hand until snug. Tighten the M4 set screws evenly using a hex key to lock the nut against the shaft shoulder. Verify the bearing is seated properly before final torque. Always follow the manufacturer's torque specifications for the application.
Used in
Common applications for JW WINCOJW WINCO Products
3G Electric supplies JW WINCO thread-locking bearing locknuts. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.