JW WINCO4-Arm Knobs with Threaded Stud

JW WINCO Hand Knob; 4-Prong Knobs: 4 Point, Aluminum w/ Steel Thread, 3/8"-16 Thread

The JW WINCO Hand Knob is a 4-arm knob with threaded stud, featuring a 2.5 in diameter aluminum body with steel thread. It has a 3/8"-16 thread size. 3G Electric interprets customer demand and delivers this genuine…

SKU 3G-OTH-530609

Brand

JW WINCO

Item

Hand Knob; 4-Prong Knobs: 4 Point, Aluminum w/ Steel Thread, 3/8"-16 Thread

Technical Specifications

JW WINCO

Manufacturer Part Number

CKS-2.50-3/8X16-3.00 

Type

Aluminum w/ Steel Thread 

Dia

2.5 in 

Thread

3/8"-16 

View Full Spec Sheet

Technical Documents

No technical documents available for this product.

Request documentation →

Not sure this is the right part? Get a recommendation.

Need installation or engineering help?

Installation, commissioning, maintenance plans, system design, and bundled product + service quotes — one team handles the full scope.

Talk to an engineer

Ask a question

JW WINCO Products

3G Electric (S) Pte. Ltd. — Singapore

Product Description

Frequently Asked Questions

What is a JW WINCO hand knob used for?

A JW WINCO hand knob provides manual control and adjustment on industrial machinery, valves, and equipment. Its 4-arm design offers a secure grip for tightening or positioning components. 3G Electric supplies this genuine JW WINCO part across 14 industrial departments, with specialist expertise in controls and pumps.

What are the specifications of the JW WINCO CKS-2.50-3/8X16-3.00 hand knob?

The JW WINCO hand knob has a 2.5 in diameter aluminum body with steel thread, a 3/8"-16 thread size, and a 4-arm design. It is model CKS-2.50-3/8X16-3.00. 3G Electric sources this genuine component for global delivery, backed by specialist knowledge in controls and pumps.

Where to buy a JW WINCO hand knob worldwide?

3G Electric supplies the JW WINCO hand knob worldwide, handling full logistics and customs clearance. As a global industrial solutions provider, we interpret your demand and deliver genuine components like this 4-arm knob with threaded stud. Contact us for availability and delivery to your location.

How to install a JW WINCO 4-arm knob with threaded stud?

To install a JW WINCO 4-arm knob, thread the 3/8"-16 stud into the mating component by hand until snug, then tighten using the knob's 4-point grip. Avoid over-torquing to prevent damage. 3G Electric provides this genuine JW WINCO part and can advise on proper selection for your application.

Used in

Common applications for JW WINCO

Machinery assembly — JW WINCO self-locking bearing locknuts (e.g., 1804.1-M50X1.5) for securing bearings on shafts in gearboxes and conveyors.

Fixture building — JW WINCO horizontal U-latch toggle clamps (e.g., 851.3-700-T6) for quick clamping in welding jigs and assembly fixtures.

Material handling — JW WINCO quick-release hoist rings (e.g., 1135-M12-17-ST) for lifting heavy components in manufacturing cells.

Shaft positioning — JW WINCO one-piece shaft collars (e.g., 5WG46/A) for retaining bearings or acting as stops on linear motion systems.

Linkage systems — JW WINCO stainless steel clevis rod ends (e.g., 8NXBIS) for connecting pneumatic cylinders or actuators in automated equipment.

Clamping arm extension — JW WINCO rigid clamping arm extenders (e.g., 801.1-85-16-ST) for increasing reach on toggle clamps in custom fixtures.

JW WINCO Products

3G Electric supplies JW WINCO 4-arm knobs with threaded stud. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.

Browse all JW WINCO products →Contact our engineers →