JW WINCOBushings for Quick-Release Hoist Rings

JW WINCO Holding Bushing: For Series GN 1130, 8 mm Pin Dia, M16-1.50 Thread Size

The JW WINCO Holding Bushing (MPN 1132-8-10-M16X1.5-A) is a stainless steel bushing designed for use with Series GN 1130 quick-release hoist rings. It features an M16-1.50 thread size and an 8 mm pin diameter. This…

SKU 3G-OTH-339003

Brand

JW WINCO

Item

Holding Bushing: For Series GN 1130, 8 mm Pin Dia, M16-1.50 Thread Size

Technical Specifications

JW WINCO

Manufacturer Part Number

1132-8-10-M16X1.5-A 

Type

M16-1.50 Thread Size, Stainless Steel 

Material

Stainless Steel 

Pin Dia

8 mm 

Thread Size

M16-1.50 

View Full Spec Sheet

Technical Documents

No technical documents available for this product.

Request documentation →

Not sure this is the right part? Get a recommendation.

Need installation or engineering help?

Installation, commissioning, maintenance plans, system design, and bundled product + service quotes — one team handles the full scope.

Talk to an engineer

Ask a question

JW WINCO Products

3G Electric (S) Pte. Ltd. — Singapore

Product Description

Frequently Asked Questions

What is the JW WINCO Holding Bushing used for?

The JW WINCO Holding Bushing is used with Series GN 1130 quick-release hoist rings to secure the pin in place. It is commonly applied in lifting and rigging operations where a stainless steel, corrosion-resistant component is required for industrial load handling.

What are the specifications of the JW WINCO Holding Bushing?

The JW WINCO Holding Bushing (MPN 1132-8-10-M16X1.5-A) has an M16-1.50 thread size and an 8 mm pin diameter. It is made of stainless steel and is designed for Series GN 1130 quick-release hoist rings. The brand is JW WINCO.

Where to buy the JW WINCO Holding Bushing worldwide?

3G Electric supplies the JW WINCO Holding Bushing worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us to source this component for your lifting applications.

How to install the JW WINCO Holding Bushing?

To install the JW WINCO Holding Bushing, thread it into the mating component using the M16-1.50 thread until snug. Insert the 8 mm pin through the bushing and into the Series GN 1130 hoist ring. Do not overtighten; follow standard torque guidelines for stainless steel fasteners.

Used in

Common applications for JW WINCO

Machinery assembly — JW WINCO self-locking bearing locknuts (e.g., 1804.1-M50X1.5) for securing bearings on shafts in gearboxes and conveyors.

Fixture building — JW WINCO horizontal U-latch toggle clamps (e.g., 851.3-700-T6) for quick clamping in welding jigs and assembly fixtures.

Material handling — JW WINCO quick-release hoist rings (e.g., 1135-M12-17-ST) for lifting heavy components in manufacturing cells.

Shaft positioning — JW WINCO one-piece shaft collars (e.g., 5WG46/A) for retaining bearings or acting as stops on linear motion systems.

Linkage systems — JW WINCO stainless steel clevis rod ends (e.g., 8NXBIS) for connecting pneumatic cylinders or actuators in automated equipment.

Clamping arm extension — JW WINCO rigid clamping arm extenders (e.g., 801.1-85-16-ST) for increasing reach on toggle clamps in custom fixtures.

JW WINCO Products

3G Electric supplies JW WINCO bushings for quick-release hoist rings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.

Browse all JW WINCO products →Contact our engineers →