JW WINCOHex-Head Stop Bolts with Retaining Magnet & Lock Nut

JW WINCO Workholding Stop Bolt: M10 Thread Size

SKU 3G-OTH-528553

Brand

JW WINCO

Item

Workholding Stop Bolt: M10 Thread Size

Technical Specifications

JW WINCO

Manufacturer Part Number

251.6-M10-50-ND 

Type

Zinc Plated Steel Bolt – Zinc Plated Steel Nut 

View Full Spec Sheet

Technical Documents

No technical documents available for this product.

Request documentation →

Not sure this is the right part? Get a recommendation.

Need installation or engineering help?

Installation, commissioning, maintenance plans, system design, and bundled product + service quotes — one team handles the full scope.

Talk to an engineer

Ask a question

JW WINCO Products

3G Electric (S) Pte. Ltd. — Singapore

Product Description

The JW WINCO Workholding Stop Bolt (M10 Thread Size) is a hex-head stop bolt with retaining magnet and lock nut, made from zinc plated steel bolt and zinc plated steel nut (MPN 251.6-M10-50-ND). 3G Electric interprets customer demand and delivers this genuine industrial component across 14 departments — with specialist depth in combustion, pumps and controls — ensuring you get the right answer, not just a catalog.

Frequently Asked Questions

What is a JW WINCO workholding stop bolt used for?

A JW WINCO workholding stop bolt with retaining magnet and lock nut is used in machining and fixturing to precisely locate and secure workpieces. The M10 thread size and hex head allow quick adjustment, while the magnet holds the bolt in place during setup.

What are the specifications of the JW WINCO stop bolt 251.6-M10-50-ND?

The JW WINCO stop bolt has an M10 thread size, a zinc plated steel bolt, and a zinc plated steel nut. It is a hex-head stop bolt with a retaining magnet and lock nut. The manufacturer part number is 251.6-M10-50-ND.

Where to buy JW WINCO stop bolts worldwide?

3G Electric supplies and delivers genuine JW WINCO stop bolts worldwide. We handle full logistics and customs clearance, ensuring you receive the correct M10 hex-head stop bolt with retaining magnet and lock nut for your workholding application.

How to install a JW WINCO workholding stop bolt?

To install a JW WINCO stop bolt, thread the M10 bolt into a tapped fixture hole until the workpiece contacts the hex head. Tighten the lock nut to secure the position. The retaining magnet holds the bolt in place during setup changes.

Used in

Common applications for JW WINCO

Machinery assembly — JW WINCO self-locking bearing locknuts (e.g., 1804.1-M50X1.5) for securing bearings on shafts in gearboxes and conveyors.

Fixture building — JW WINCO horizontal U-latch toggle clamps (e.g., 851.3-700-T6) for quick clamping in welding jigs and assembly fixtures.

Material handling — JW WINCO quick-release hoist rings (e.g., 1135-M12-17-ST) for lifting heavy components in manufacturing cells.

Shaft positioning — JW WINCO one-piece shaft collars (e.g., 5WG46/A) for retaining bearings or acting as stops on linear motion systems.

Linkage systems — JW WINCO stainless steel clevis rod ends (e.g., 8NXBIS) for connecting pneumatic cylinders or actuators in automated equipment.

Clamping arm extension — JW WINCO rigid clamping arm extenders (e.g., 801.1-85-16-ST) for increasing reach on toggle clamps in custom fixtures.

JW WINCO Products

3G Electric supplies JW WINCO hex-head stop bolts with retaining magnet & lock nut. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.

Browse all JW WINCO products →Contact our engineers →