JW WINCOAluminum Threaded Plugs

JW WINCO Threaded Plug: Aluminum, NBR Seal, Type G, 3/4 in Thd, 27 mm Drive Size

The JW WINCO Threaded Plug is an aluminum Type G plug with a 3/4 in thread, a 27 mm drive size, and a 32 mm outside diameter. It features an NBR seal and is identified by manufacturer part number 741-32-G3/4-OS-1.

SKU 3G-OTH-172171

Brand

JW WINCO

Item

Threaded Plug: Aluminum, NBR Seal, Type G, 3/4 in Thd, 27 mm Drive Size

Technical Specifications

JW WINCO

Manufacturer Part Number

741-32-G3/4-OS-1 

Type

NBR Seal, Type G 

Thd

3/4 in 

Drive Size

27 mm 

Outside Dia

32 mm 

View Full Spec Sheet

Technical Documents

No technical documents available for this product.

Request documentation →

Not sure this is the right part? Get a recommendation.

Need installation or engineering help?

Installation, commissioning, maintenance plans, system design, and bundled product + service quotes — one team handles the full scope.

Talk to an engineer

Ask a question

JW WINCO Products

3G Electric (S) Pte. Ltd. — Singapore

Product Description

Frequently Asked Questions

What is the JW WINCO Threaded Plug used for?

The JW WINCO Threaded Plug is used to seal hydraulic and pneumatic ports in industrial equipment. Its Type G thread and NBR seal provide a leak-tight closure in fluid power systems, preventing contamination and pressure loss in manifolds, valves, and cylinders.

What are the specifications of the JW WINCO Threaded Plug?

The JW WINCO Threaded Plug (MPN 741-32-G3/4-OS-1) is made of aluminum with an NBR seal. It has a 3/4 in Type G thread, a 27 mm drive size, and a 32 mm outside diameter. It is designed for hydraulic and pneumatic sealing applications.

Where to buy the JW WINCO Threaded Plug worldwide?

You can source the JW WINCO Threaded Plug through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on this part.

How to install the JW WINCO Threaded Plug?

To install the JW WINCO Threaded Plug, clean the port threads and apply a compatible thread sealant if required. Hand-tighten the plug into the Type G port, then use a 27 mm drive tool to torque it to the manufacturer's recommended specification. Avoid over-tightening to prevent damage to the aluminum body or NBR seal.

Used in

Common applications for JW WINCO

Machinery assembly — JW WINCO self-locking bearing locknuts (e.g., 1804.1-M50X1.5) for securing bearings on shafts in gearboxes and conveyors.

Fixture building — JW WINCO horizontal U-latch toggle clamps (e.g., 851.3-700-T6) for quick clamping in welding jigs and assembly fixtures.

Material handling — JW WINCO quick-release hoist rings (e.g., 1135-M12-17-ST) for lifting heavy components in manufacturing cells.

Shaft positioning — JW WINCO one-piece shaft collars (e.g., 5WG46/A) for retaining bearings or acting as stops on linear motion systems.

Linkage systems — JW WINCO stainless steel clevis rod ends (e.g., 8NXBIS) for connecting pneumatic cylinders or actuators in automated equipment.

Clamping arm extension — JW WINCO rigid clamping arm extenders (e.g., 801.1-85-16-ST) for increasing reach on toggle clamps in custom fixtures.

JW WINCO Products

3G Electric supplies JW WINCO aluminum threaded plugs. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.

Browse all JW WINCO products →Contact our engineers →