JW WINCOPressure-Relief Breather Vents

JW WINCO Breather Valve: 1/4", SAE, Low Design w/o Breather Cap Design, 160 mbar Min. Opening

The JW WINCO Breather Valve is a 1/4" SAE pressure-relief breather vent with a low design without breather cap, constructed from brass. It features a minimum opening pressure of 160 mbar (MPN 883-G1/4-160-A-MS).

SKU 3G-OTH-591730

Brand

JW WINCO

Item

Breather Valve: 1/4", SAE, Low Design w/o Breather Cap Design, 160 mbar Min. Opening

Technical Specifications

JW WINCO

Manufacturer Part Number

883-G1/4-160-A-MS 

Type

SAE, Low Design w/o Breather Cap Design, 160 mbar Min. Opening, Brass 

Thread Size

1/4" 

Thread Type

SAE

Body Material

Brass 

Opening Pressure - Minimum

160 mbar 

View Full Spec Sheet

Technical Documents

No technical documents available for this product.

Request documentation →

Not sure this is the right part? Get a recommendation.

Need installation or engineering help?

Installation, commissioning, maintenance plans, system design, and bundled product + service quotes — one team handles the full scope.

Talk to an engineer

Ask a question

JW WINCO Products

3G Electric (S) Pte. Ltd. — Singapore

Product Description

Frequently Asked Questions

What is a JW WINCO breather valve used for?

A JW WINCO breather valve relieves excess pressure in hydraulic or pneumatic systems, preventing seal damage and component failure. This 1/4" SAE brass model with 160 mbar minimum opening pressure is common in industrial fluid power applications where controlled venting is required.

What are the specifications of the JW WINCO 883-G1/4-160-A-MS breather valve?

This JW WINCO breather valve has a 1/4" SAE thread, brass body, and a low design without breather cap. Its minimum opening pressure is 160 mbar. The manufacturer part number is 883-G1/4-160-A-MS. It is a pressure-relief vent for fluid power systems.

Where to buy a JW WINCO breather valve worldwide?

3G Electric supplies the JW WINCO 883-G1/4-160-A-MS breather valve worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time on this brass pressure-relief vent.

How to install a JW WINCO breather valve?

Install the JW WINCO breather valve by threading it into a 1/4" SAE port on your reservoir or manifold. Use thread sealant on the brass threads to prevent leaks. Ensure the valve is oriented to allow free venting and is not obstructed by debris or paint.

Used in

Common applications for JW WINCO

Machinery assembly — JW WINCO self-locking bearing locknuts (e.g., 1804.1-M50X1.5) for securing bearings on shafts in gearboxes and conveyors.

Fixture building — JW WINCO horizontal U-latch toggle clamps (e.g., 851.3-700-T6) for quick clamping in welding jigs and assembly fixtures.

Material handling — JW WINCO quick-release hoist rings (e.g., 1135-M12-17-ST) for lifting heavy components in manufacturing cells.

Shaft positioning — JW WINCO one-piece shaft collars (e.g., 5WG46/A) for retaining bearings or acting as stops on linear motion systems.

Linkage systems — JW WINCO stainless steel clevis rod ends (e.g., 8NXBIS) for connecting pneumatic cylinders or actuators in automated equipment.

Clamping arm extension — JW WINCO rigid clamping arm extenders (e.g., 801.1-85-16-ST) for increasing reach on toggle clamps in custom fixtures.

JW WINCO Products

3G Electric supplies JW WINCO pressure-relief breather vents. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.

Browse all JW WINCO products →Contact our engineers →