JW WINCO Non-Marring Half Dog Point Set Screw
The JW WINCO Set Screw with Brass Tip is a non-marring half dog point set screw, featuring a stainless steel body with an M10 thread size and 40 mm length. This metric fastener, made from 18-8 stainless steel, is…
SKU 3G-OTH-525028
Also listed as: 9135M1040MS · 913 5 M10 40 MS · 913-5-M10-40-MS
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The JW WINCO Set Screw with Brass Tip is a non-marring half dog point set screw, featuring a stainless steel body with an M10 thread size and 40 mm length. This metric fastener, made from 18-8 stainless steel, is supplied in a small pack under MPN 913.5-M10-40-MS.
Frequently Asked Questions
What is a JW WINCO set screw with brass tip used for?
This non-marring half dog point set screw is used to secure components without damaging surfaces. The brass tip prevents marking on shafts or mating parts, making it ideal for precision alignment in industrial machinery, conveyors, and automation systems where surface integrity is critical.
What are the specifications of the JW WINCO 913.5-M10-40-MS set screw?
This JW WINCO set screw has an M10 thread size, 40 mm length, and an 18-8 stainless steel body with a brass tip. It is a metric, non-marring half dog point fastener supplied in a small pack. The brass tip prevents surface damage during installation and use.
Where to buy JW WINCO set screws with brass tip worldwide?
3G Electric supplies JW WINCO set screws with brass tip worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your location. Contact us to order the MPN 913.5-M10-40-MS or other JW WINCO fasteners for your application.
How to install a JW WINCO brass tip set screw?
Clean the threaded hole and shaft surface before installation. Apply a light lubricant to the stainless steel threads to prevent galling. Tighten the set screw using a hex key until the brass tip contacts the shaft, then apply final torque per standard fastener guidelines. Avoid over-tightening to prevent brass tip deformation.
Used in
Common applications for JW WINCOJW WINCO Products
3G Electric supplies JW WINCO non-marring half dog point set screws. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
