KIPP Rear-Mount Stainless Steel Insert with Abrasive Diamond Face
The KIPP Rear-Mount Insert w/Diamond Face is a 16 mm diameter stainless steel insert with an abrasive diamond face, featuring an M6 thread and 10 mm height (MPN K0385.16105). This rear-mount insert is designed for…
SKU 3G-OTH-180005
Also listed as: K038516105 · K0385 16105 · K0385-16105
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The KIPP Rear-Mount Insert w/Diamond Face is a 16 mm diameter stainless steel insert with an abrasive diamond face, featuring an M6 thread and 10 mm height (MPN K0385.16105). This rear-mount insert is designed for industrial applications requiring a durable, abrasive gripping surface.
Frequently Asked Questions
What is KIPP Rear-Mount Insert w/Diamond Face used for?
This KIPP insert provides a non-slip gripping surface on jigs, fixtures, and workholding equipment. The diamond abrasive face prevents workpiece movement during machining, assembly, or inspection. It is commonly used in industrial manufacturing, metalworking, and automation applications where secure part clamping is required.
What are the specifications of the KIPP K0385.16105 insert?
The KIPP K0385.16105 is a rear-mount stainless steel insert with an abrasive diamond face. It has a 16 mm diameter, M6 thread, and 10 mm height. The diamond grit face provides high friction for secure clamping. This model is part of KIPP's rear-mount insert series designed for workholding applications.
Where to buy KIPP K0385.16105 worldwide?
3G Electric supplies the KIPP K0385.16105 rear-mount insert worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your location. Contact our team for pricing and lead time on this diamond-faced insert.
How to install a KIPP rear-mount diamond insert?
Install the KIPP insert by threading the M6 stud into a pre-drilled and tapped hole in your fixture or jig. Tighten securely using a hex key on the internal drive. Ensure the diamond face is clean and free of debris before clamping workpieces. For best results, use a torque wrench to avoid over-tightening.
Used in
Common applications for KIPPKIPP Products
3G Electric supplies KIPP rear-mount stainless steel inserts with abrasive diamond face. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.