KIPP Rear-Mount Stainless Steel Insert with Abrasive Diamond Face
The KIPP Rear-Mount Insert with Diamond Face (25 mm Dia, M6, 10 mm Ht) is a stainless steel insert featuring an abrasive diamond grit face. It is designed for rear-mount applications requiring a durable gripping surface.
SKU 3G-OTH-179997
Also listed as: K038525105 · K0385 25105 · K0385-25105
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The KIPP Rear-Mount Insert with Diamond Face (25 mm Dia, M6, 10 mm Ht) is a stainless steel insert featuring an abrasive diamond grit face. It is designed for rear-mount applications requiring a durable gripping surface.
Frequently Asked Questions
What is a KIPP rear-mount insert with diamond face used for?
A KIPP rear-mount insert with diamond face is used in industrial workholding and positioning applications to provide a hard, wear-resistant gripping surface. It is commonly installed in fixtures, jigs, and clamping systems where high friction and durability are needed to hold parts securely during machining or assembly.
What are the specifications of the KIPP K0385.25105 rear-mount insert?
The KIPP K0385.25105 rear-mount insert has a 25 mm diameter, M6 thread, and 10 mm height. It features a stainless steel body with an abrasive diamond grit face for enhanced grip. This insert is designed for rear mounting and is suitable for applications requiring high friction and wear resistance.
Where to buy KIPP rear-mount inserts with diamond face worldwide?
You can source KIPP rear-mount inserts with diamond face worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on the KIPP K0385.25105 or similar models.
How to install a KIPP rear-mount insert with diamond face?
To install a KIPP rear-mount insert, drill and tap a hole matching the M6 thread size in your fixture. Insert the diamond-faced insert from the rear side and tighten securely using a hex key. Ensure the surface is clean and the insert is fully seated to avoid movement during use. Follow standard workholding best practices.
Used in
Common applications for KIPPKIPP Products
3G Electric supplies KIPP rear-mount stainless steel inserts with abrasive diamond face. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.