Send a part number, a photo, or a whole BOM — we supply it and stand behind it. EXW Singapore — collect from our office.

3G Electric
Describe the job or paste specifications. Press Enter or Search.
RFQ CartGet a QuoteSign inSign up
LABCONCO 9500401 Epoxy Fume Hood Work Surface - Fume Hood Work Surfaces
LABCONCOFume Hood Work Surfaces

LABCONCO 9500401 Epoxy Fume Hood Work Surface

The LABCONCO Spill Stop Work Surface is a 30-inch-wide, 4-foot-long, 1.25-inch-thick epoxy fume hood work surface designed for use with Protector Premier Laboratory Hoods. It includes a cup sink cut-out located at…

SKU 3G-OTH-364095

Brand
LABCONCO
Item
9500401 Epoxy Fume Hood Work Surface
Part Number
9500401
Category
Fume Hood Work Surfaces
Available to Order
Also known as:9500401LABCONCO
Trade pricing by quote — replies within 24h
Qty
WhatsApp an engineerMessage via Telegram
No account needed — your quote request goes straight to our engineers. A free account lets you track quotes and re-order faster.
EXW Singapore
Collect or forward from our office
Datasheet on Request
Technical specs
1-Day Quote
Replies within 24h

Local availability & support — Singapore

Local office
20 Woodlands Link #09-05, Singapore 738733
Phone
+65 8878 8355
Payment
Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.

Technical Specifications

LABCONCO
Manufacturer Part Number
9500401
Type
Epoxy
Material
Epoxy
Overall Lg
4 ft
Thick
1 1/4 in
Features
Large Radius to Aerodynamically Direct Airflow Into the Fume Hood
For Use With
Protector Premier Laboratory Hoods
Product Type
Fume Hood Work Surface
Cup Sink Cut-Out Location
Right Rear

Technical Documents

No technical documents available for this product.
Request documentation →
Not sure this is the right part? Get a recommendation.

Need installation or engineering help?

Installation, commissioning, maintenance plans, system design, and bundled product + service quotes — one team handles the full scope.
Talk to an engineer

Ask a question

LABCONCO Products
3G Electric (S) Pte. Ltd. — Singapore

Product Description

The LABCONCO Spill Stop Work Surface is a 30-inch-wide, 4-foot-long, 1.25-inch-thick epoxy fume hood work surface designed for use with Protector Premier Laboratory Hoods. It includes a cup sink cut-out located at the right rear and features a large radius to aerodynamically direct airflow into the fume hood.

Frequently Asked Questions

What is the LABCONCO Spill Stop Work Surface used for?

The LABCONCO Spill Stop Work Surface is a fume hood work surface designed for use with Protector Premier Laboratory Hoods. It provides a durable epoxy surface that contains spills and features a large radius to aerodynamically direct airflow into the hood, improving containment and safety in laboratory environments.

What are the specifications of the LABCONCO Spill Stop Work Surface?

The LABCONCO Spill Stop Work Surface (MPN 9500401) measures 30 inches wide by 4 feet long by 1 1/4 inches thick. It is made of epoxy and includes a cup sink cut-out located at the right rear. It is designed for use with Protector Premier Laboratory Hoods and features a large radius to aerodynamically direct airflow.

Where to buy the LABCONCO Spill Stop Work Surface worldwide?

3G Electric supplies the LABCONCO Spill Stop Work Surface to customers worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on this epoxy fume hood work surface.

How to install the LABCONCO Spill Stop Work Surface?

Install the LABCONCO Spill Stop Work Surface by placing it securely into the Protector Premier Laboratory Hood frame. Ensure the cup sink cut-out aligns with the right rear position. Follow standard fume hood work surface installation practices: verify level fit, seal edges with appropriate caulk, and confirm the large radius faces the hood interior for proper airflow.

Used in

Common applications for LABCONCO
Pharmaceutical compounding — Labconco Nexus horizontal clean bench with HEPA filtration for particle-free preparation of non-hazardous compounds.
Chemical research — Labconco Protector XStream ducted fume hood for exhausting hazardous vapors and fumes outside the building.
Clinical laboratory — Labconco undercounter glassware washer for cleaning narrow-mouth glassware with touch-screen control and 115V AC operation.
Laboratory safety — Labconco airflow monitor with night setback for continuous verification of fume hood airflow in 208–230V AC installations.
Electronics assembly — Labconco clean bench with horizontal airflow to protect sensitive components from airborne contaminants.
Environmental testing — Labconco airflow sensor with mounting hardware for monitoring ventilation in fume hoods at 120V AC.
Not sure this is the right part? Photo-identify it→

LABCONCO Products

3G Electric supplies LABCONCO fume hood work surfaces. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.

You might also need

Burners & Combustion →Pumps & Compressors →Spare Parts →All Products →

More from LABCONCO

View all LABCONCO parts →
Epoxy fume hood work surface, 6 ft long by 1 1/4 in thick, with pre-drilled holes for venting and plumbing. Designed for use with Protector ClassMate laboratory hoods. No cup sink cut-out included
LABCONCO
Epoxy fume hood work surface, 6 ft long by 1 1/4 in thick, with pre-drilled holes for venting and plumbing. Designed for use with Protector ClassMate laboratory hoods. No cup sink cut-out included
This stainless steel work surface is designed for use with XPert Filtered Balance Stations. It provides a flat, corrosion-resistant platform for laboratory procedures. The surface measures 24 inches in overall length and 13/16 inches in thickness, with no cup sink cut-out
LABCONCO
This stainless steel work surface is designed for use with XPert Filtered Balance Stations. It provides a flat, corrosion-resistant platform for laboratory procedures. The surface measures 24 inches in overall length and 13/16 inches in thickness, with no cup sink cut-out
Epoxy fume hood work surface measuring 4 ft long by 1-1/4 in thick, with a left rear cup sink cut-out. Corrosion resistant for use in laboratory fume hoods, providing a durable bench area that withstands chemical exposure
LABCONCO
Epoxy fume hood work surface measuring 4 ft long by 1-1/4 in thick, with a left rear cup sink cut-out. Corrosion resistant for use in laboratory fume hoods, providing a durable bench area that withstands chemical exposure
This epoxy work surface is designed for use with XPert Filtered Balance Stations. It measures 6 ft in overall length, 1 in in thickness, and does not include a cup sink cut-out. The epoxy material provides a chemical-resistant platform for laboratory weighing and handling applications
LABCONCO
This epoxy work surface is designed for use with XPert Filtered Balance Stations. It measures 6 ft in overall length, 1 in in thickness, and does not include a cup sink cut-out. The epoxy material provides a chemical-resistant platform for laboratory weighing and handling applications
Epoxy fume hood work surface, 6 ft overall length, 1 1/4 in thick, dished and contoured to conform to the interior liner of laboratory hoods. Includes a cup sink cut-out on the right side. For use with Protector XL Laboratory Hoods
LABCONCO
Epoxy fume hood work surface, 6 ft overall length, 1 1/4 in thick, dished and contoured to conform to the interior liner of laboratory hoods. Includes a cup sink cut-out on the right side. For use with Protector XL Laboratory Hoods
This 1-inch-thick epoxy work surface is designed for use with Paramount Ductless Enclosures. It provides a chemical-resistant bench area for laboratory procedures, protecting the enclosure base from spills and corrosion. The surface measures 4 feet in length and does not include a cup sink cut-out
LABCONCO
This 1-inch-thick epoxy work surface is designed for use with Paramount Ductless Enclosures. It provides a chemical-resistant bench area for laboratory procedures, protecting the enclosure base from spills and corrosion. The surface measures 4 feet in length and does not include a cup sink cut-out
Epoxy work surface for fume hoods, dished and contoured to conform to the interior liner of laboratory hoods. Includes a cup sink cut-out at the right rear. Overall length 6 ft, width 30 in, thickness 1-1/4 in. For use with Protector Premier Laboratory Hoods
LABCONCO
Epoxy work surface for fume hoods, dished and contoured to conform to the interior liner of laboratory hoods. Includes a cup sink cut-out at the right rear. Overall length 6 ft, width 30 in, thickness 1-1/4 in. For use with Protector Premier Laboratory Hoods
Epoxy fume hood work surface with pre-drilled holes for venting and plumbing. Includes a cup sink cut-out on the right side. Designed for use with Protector Premier Laboratory Hoods. Overall length 8 ft, thickness 1 1/4 in
LABCONCO
Epoxy fume hood work surface with pre-drilled holes for venting and plumbing. Includes a cup sink cut-out on the right side. Designed for use with Protector Premier Laboratory Hoods. Overall length 8 ft, thickness 1 1/4 in

Customer reviews

No reviews yet — be the first

Questions & answers

No questions yet — ask us the first