LEGRIS 0104 10 00 Standard Sleeve Brass Compression Fitting, 10 mm OD, 10 PK
The LEGRIS Compression Tee Fitting (MPN 0104 10 00) is a standard sleeve brass compression fitting for 10 mm OD tubing, sold in packs of 10. 3G Electric interprets your demand for this OEM part, sources it across 14…
SKU 3G-OTH-482237
Also listed as: 01041000 · 0104-10-00
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The LEGRIS Compression Tee Fitting (MPN 0104 10 00) is a standard sleeve brass compression fitting for 10 mm OD tubing, sold in packs of 10. 3G Electric interprets your demand for this OEM part, sources it across 14 industrial departments, and supports with specialist depth in combustion, pumps, and controls.
Frequently Asked Questions
What is the LEGRIS Compression Tee Fitting used for?
The LEGRIS Compression Tee Fitting (MPN 0104 10 00) is used to branch or join three 10 mm OD tubes in pneumatic, fluid handling, or instrumentation systems. It is a standard sleeve brass compression fitting, ideal for creating leak-proof connections in industrial air, water, or low-pressure gas lines.
What are the specifications of the LEGRIS Compression Tee Fitting?
The LEGRIS Compression Tee Fitting (MPN 0104 10 00) is a standard sleeve brass compression fitting for 10 mm OD tubing. It is sold in packs of 10. The fitting is made of brass and is designed for reliable, leak-resistant connections in pneumatic and fluid systems.
Where to buy LEGRIS Compression Tee Fitting worldwide?
3G Electric supplies the LEGRIS Compression Tee Fitting (MPN 0104 10 00) worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source this OEM part across 14 departments, including specialist expertise in combustion, pumps, and controls.
How to install a LEGRIS Compression Tee Fitting?
To install the LEGRIS Compression Tee Fitting, cut the 10 mm OD tubing square, deburr the end, and slide the nut and sleeve onto the tube. Insert the tube fully into the fitting body, then tighten the nut by hand and a further 1-1.5 turns with a wrench. Avoid overtightening to prevent damage.
Used in
Common applications for LEGRISLEGRIS Products
3G Electric supplies LEGRIS standard sleeve brass compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
