LEGRIS 3014 62 18 Push-to-Connect x FNPT Adapter
The LEGRIS Push-Fit Adapter Fitting (MPN 3014 62 18) is a push-to-connect x FNPT brass fitting, supplied in a 10-pack. It connects 1/2 in OD tubing to a 3/8 in pipe thread. This nylon and nickel-plated brass tube…
SKU 3G-OTH-492311
Also listed as: 30146218 · 3014-62-18
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The LEGRIS Push-Fit Adapter Fitting (MPN 3014 62 18) is a push-to-connect x FNPT brass fitting, supplied in a 10-pack. It connects 1/2 in OD tubing to a 3/8 in pipe thread. This nylon and nickel-plated brass tube fitting is part of our broader industrial offering across 14 departments, with specialist depth in combustion, pumps, and controls.
Frequently Asked Questions
What is the LEGRIS Push-Fit Adapter Fitting used for?
The LEGRIS Push-Fit Adapter Fitting (MPN 3014 62 18) connects 1/2 in OD tubing to a 3/8 in FNPT pipe thread. It is used in pneumatic and fluid-handling systems across industrial departments like machining, material handling, and instrumentation, where reliable push-to-connect brass fittings are required.
What are the specifications of the LEGRIS 3014 62 18 fitting?
This LEGRIS fitting is a push-to-connect x FNPT adapter in nickel-plated brass, supplied as a 10-pack. It has a 3/8 in thread size A and connects 1/2 in OD tubing. The fitting is part of the nylon and nickel-plated brass tube fittings category, suitable for compressed air and low-pressure fluid applications.
Where to buy LEGRIS push-fit fittings in worldwide?
3G Electric supplies LEGRIS push-fit fittings like the 3014 62 18 to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source and deliver genuine LEGRIS components across 14 departments, including pneumatics and controls.
How to install a LEGRIS push-to-connect fitting?
To install a LEGRIS push-to-connect fitting, cut the tubing square, deburr the end, and push it fully into the fitting until it stops. For the FNPT end, apply thread sealant and tighten to the male port. Ensure the tubing is fully seated and the collet grips evenly. Always depressurize the system before installation.
Used in
Common applications for LEGRISLEGRIS Products
3G Electric supplies LEGRIS nylon & nickel-plated brass tube fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
