LEGRIS Compression Fitting Coupling: 3/8 in Pipe x 10 mm OD Fitting Size, BSPT x Compression
The LEGRIS Compression Fitting Coupling is a standard sleeve brass compression fitting with a 3/8 in pipe x 10 mm OD fitting size, type BSPT x Compression, Brass (MPN 0120 10 17). 3G Electric interprets demand and…
SKU 3G-OTH-482068
Need installation or engineering help?
Ask a question
Product Description
The LEGRIS Compression Fitting Coupling is a standard sleeve brass compression fitting with a 3/8 in pipe x 10 mm OD fitting size, type BSPT x Compression, Brass (MPN 0120 10 17). 3G Electric interprets demand and delivers this genuine industrial component across 14 departments — and far more — with specialist depth in combustion, pumps and controls as an authorised distributor for brands including LEGRIS, Schneider, ABB, Siemens, SKF, Festo, Fluke, Interpump and FBR.
Frequently Asked Questions
What is a LEGRIS compression fitting coupling used for?
A LEGRIS compression fitting coupling connects two pipes or a pipe to a fitting in pneumatic, hydraulic, and fluid-handling systems. It provides a leak-tight seal without soldering or welding, making it ideal for industrial air, water, and oil lines across machining, material handling, and instrumentation applications.
What are the specifications of the LEGRIS 0120 10 17 compression fitting?
The LEGRIS 0120 10 17 is a standard sleeve brass compression fitting coupling. It has a 3/8 in BSPT male pipe thread x 10 mm OD compression fitting size, type BSPT x Compression, and is made of brass. This part is suitable for connecting metric tubing to BSPT threaded ports.
Where to buy LEGRIS compression fittings in worldwide?
3G Electric supplies and delivers genuine LEGRIS compression fittings worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure your order reaches any international destination. Contact us for pricing and lead time on the LEGRIS 0120 10 17 coupling.
How to install a LEGRIS brass compression fitting?
To install a LEGRIS brass compression fitting, slide the nut and ferrule onto the tube, insert the tube fully into the fitting body, then tighten the nut by hand followed by a wrench until snug. Avoid over-tightening to prevent tube deformation. Always use the correct tube size (10 mm OD) for a proper seal.
Used in
Common applications for LEGRISLEGRIS Products
3G Electric supplies LEGRIS standard sleeve brass compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
