LEGRIS Push-to-Connect x MNPT Elbow Fitting
The LEGRIS Push-Fit Elbow Fitting (MPN VS369PTCR-10-8) is a brass Push-to-Connect x MNPT fitting sized for 5/8 in OD tube and 1/2 in pipe. It features a Vibra-Seal thread sealant for reliable connections. 3G Electric…
SKU 3G-OTH-655471
Also listed as: VS369PTCR108 · VS369PTCR 10 8
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The LEGRIS Push-Fit Elbow Fitting (MPN VS369PTCR-10-8) is a brass Push-to-Connect x MNPT fitting sized for 5/8 in OD tube and 1/2 in pipe. It features a Vibra-Seal thread sealant for reliable connections. 3G Electric sources this genuine industrial fitting across 14 departments, with specialist expertise in combustion, pumps, and controls as an authorised distributor.
Frequently Asked Questions
What is the LEGRIS Push-Fit Elbow Fitting used for?
This LEGRIS brass push-to-connect elbow fitting connects 5/8 in OD tubing to 1/2 in male NPT ports in pneumatic and air brake systems. It is used in industrial automation, commercial vehicle air lines, and fluid power applications where a reliable, leak-free seal is required.
What are the specifications of the LEGRIS VS369PTCR-10-8 fitting?
The LEGRIS VS369PTCR-10-8 is a brass push-to-connect x MNPT elbow fitting. It accepts 5/8 in OD tube and 1/2 in pipe thread. It includes Vibra-Seal thread sealant pre-applied to the male NPT end for vibration-resistant connections. The manufacturer part number is VS369PTCR-10-8.
Where to buy LEGRIS push-fit fittings worldwide?
3G Electric sources and delivers genuine LEGRIS push-fit fittings worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial supplier across 14 departments, we provide the right fitting for your application, including this VS369PTCR-10-8 brass elbow.
How to install a LEGRIS push-to-connect elbow fitting?
To install the LEGRIS push-to-connect elbow, cut tubing square, deburr, and push fully into the collet until it stops. For the male NPT end, apply thread sealant (Vibra-Seal is pre-applied) and tighten to the port. Do not overtighten. Always depressurize the system before installation or removal.
Used in
Common applications for LEGRISLEGRIS Products
3G Electric supplies LEGRIS brass & composite air brake fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
