LIFT-ALL HH230 Webbed Restraint, 30 in, Nylon, 2 Plies, Choker Eye
The LIFT-ALL Hose Halter is a webbed restraint (model HH230) designed for hose-to-hose connection on water hoses up to 2 in diameter. Made of 2-ply nylon with a 30 in length and choker eye type, it is rated for…
SKU 3G-OTH-741262
Also listed as: HH 230 · HH-230
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The LIFT-ALL Hose Halter is a webbed restraint (model HH230) designed for hose-to-hose connection on water hoses up to 2 in diameter. Made of 2-ply nylon with a 30 in length and choker eye type, it is rated for maximum hose pressure of 52,000 psi @ 1/4 in ID (varies by hose inside diameter). 3G Electric interprets this demand and sources the correct safety halter across 14 industrial departments — with specialist depth in combustion, pumps and controls — ensuring you get the right answer, not just a catalog.
Frequently Asked Questions
What is a LIFT-ALL Hose Halter used for?
The LIFT-ALL Hose Halter (HH230) is a webbed safety restraint that connects two water hoses up to 2 in diameter, preventing whipping if a coupling fails. It is used in high-pressure industrial water systems up to 52,000 psi @ 1/4 in ID, providing a secondary retention layer for personnel and equipment safety.
What are the specifications of the LIFT-ALL HH230 Hose Halter?
The LIFT-ALL HH230 is a 30 in long, 2-ply nylon webbed restraint with a choker eye type. It is designed for hose-to-hose connection on water hoses up to 2 in diameter. Maximum hose pressure rating is 52,000 psi @ 1/4 in ID, varying by hose inside diameter. The material is nylon.
Where to buy a LIFT-ALL Hose Halter worldwide?
3G Electric supplies the LIFT-ALL HH230 Hose Halter worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to deliver this webbed restraint to your facility. Contact us to source the correct safety halter for your high-pressure water hose application.
How to install a LIFT-ALL Hose Halter?
To install the LIFT-ALL HH230, loop the choker eye around one hose, pass the other end through the eye, and tighten around the second hose. Ensure the halter is snug but not over-tightened, and position it near the coupling. Always follow the manufacturer's guidelines for proper placement and inspection before each use.
Used in
Common applications for LIFT-ALLLIFT-ALL Products
3G Electric supplies LIFT-ALL webbed restraints. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
You might also need
Compatible alternatives & equivalents
- CAPLUGS Polyester webbed restraint for hydraulic hose up to 2 in diameter. 22 in length with bolt-fix eye for hose-to-surface mounting. Rated for maximum hose pressure of 7,250 psi. Used to secure hose ends and prevent whipping in high-pressure systems
- LIFT-ALL Light-use nylon twisted-eye web sling with 2 plies, 14 ft length, and 12,300 lb vertical hitch capacity. Suitable for general lifting and rigging tasks where load protection and flexibility are required. Standard tag included