MALCO M2007 Offset General Purpose Metal Snips
The MALCO Offset Snip: Right (MPN M2007) is a right-handed offset general purpose metal snip with a 10-inch overall length and a 1 1/4-inch cutting length. It features steel blades, a plastic handle, and a steel…
SKU 3G-OTH-295246
Also listed as: M 2007 · M-2007
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Compliance & shipping
- Hazardous material
- Not classified as hazardous
- California Prop 65 warning
- No warning recorded
- Licence required
- No licence required
- Safety Data Sheet
- Not available
- Special shipping
- Ships under standard freight
Need installation or engineering help?
Ask a question
Product Description
The MALCO Offset Snip: Right (MPN M2007) is a right-handed offset general purpose metal snip with a 10-inch overall length and a 1 1/4-inch cutting length. It features steel blades, a plastic handle, and a steel body, with a metal construction and a cutting capacity of 0.054 inches in copper.
Frequently Asked Questions
What is the MALCO Offset Snip M2007 used for?
The MALCO Offset Snip M2007 is a right-handed offset general purpose metal snip designed for cutting metal, including copper up to 0.054 inches thick. Its offset blades allow for straight-line cuts while keeping hands clear of the work surface, making it ideal for HVAC, ductwork, and sheet metal fabrication.
What are the specifications of the MALCO Offset Snip M2007?
The MALCO Offset Snip M2007 has a 10-inch overall length and a 1 1/4-inch cutting length. It features steel blades, a plastic handle, and a steel body. The cutting capacity is 0.054 inches in copper. It is a right-handed offset snip with a metal construction, manufactured by MALCO.
Where to buy MALCO Offset Snip M2007 worldwide?
You can source the MALCO Offset Snip M2007 through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time; we provide competitive sourcing for this MALCO snip.
How to maintain MALCO Offset Snip M2007?
To maintain the MALCO Offset Snip M2007, keep the steel blades clean and dry after use to prevent rust. Apply light oil to the pivot joint periodically for smooth operation. Avoid cutting materials harder than the rated 0.054-inch copper capacity to prevent blade damage. Store in a dry environment.
Used in
Common applications for MALCOMALCO Products
3G Electric supplies MALCO offset general purpose metal snips. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.