MEM-CO Barbed Fitting Elbow: 1/2 in Pipe x 11/64 in ID Size, FBSPT x Barbed, Brass
The MEM-CO Barbed Fitting Elbow is a standard brass barbed tube fitting with a 1/2 in pipe size and 11/64 in ID size. It features an FBSPT x Barbed, Brass, Beaded Barb design (MPN 1/2BSPT-LB4).
SKU 3G-OTH-476679
Also listed as: 12BSPTLB4 · 1 2BSPT LB4 · 1-2BSPT-LB4
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The MEM-CO Barbed Fitting Elbow is a standard brass barbed tube fitting with a 1/2 in pipe size and 11/64 in ID size. It features an FBSPT x Barbed, Brass, Beaded Barb design (MPN 1/2BSPT-LB4).
Frequently Asked Questions
What is the MEM-CO Barbed Fitting Elbow used for?
The MEM-CO Barbed Fitting Elbow connects 1/2 in FBSPT threaded pipe to 11/64 in ID flexible tubing in low-pressure fluid or air systems. It is commonly used in industrial instrumentation, pneumatic controls, and lubrication lines where a leak-resistant, brass barbed joint is required.
What are the specifications of the MEM-CO 1/2BSPT-LB4 elbow?
This MEM-CO elbow has a 1/2 in FBSPT male thread on one end and a beaded barb for 11/64 in ID tubing on the other. It is made of brass with a beaded barb design for secure hose retention. The MPN is 1/2BSPT-LB4.
Where to buy MEM-CO barbed fittings in worldwide?
3G Electric supplies MEM-CO barbed fittings like the 1/2BSPT-LB4 elbow to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote on this brass fitting or other industrial components across 14 departments.
How to install a MEM-CO brass barbed elbow?
Apply thread sealant to the FBSPT male thread and tighten into the female port. Push the 11/64 in ID tubing fully onto the beaded barb until seated. For secure retention, use a hose clamp over the barbed section. Avoid overtightening the brass threads to prevent cracking.
MEM-CO Products
3G Electric supplies MEM-CO standard brass barbed tube fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
