MEM-COStandard Brass Barbed Tube Fittings

MEM-CO 1/2FLB3-1/2 Standard Brass Barbed Tube Fitting

The MEM-CO Barbed Fitting Elbow is a standard brass barbed tube fitting with a 1/2 in pipe connection and 5/32 in ID size. It features an FNPT x Barbed, Brass, Beaded Barb design (MPN 1/2FLB3-1/2).

SKU 3G-OTH-476636

Also listed as: 12FLB312 · 1 2FLB3 1 2 · 1-2FLB3-1-2

Brand

MEM-CO

Item

1/2FLB3-1/2 Standard Brass Barbed Tube Fitting

Part Number

1/2FLB3-1/2

Local availability & support — Singapore

Local office: 20 Woodlands Link #09-05, Singapore 738733
Phone: +65 8878 8355
Payment: Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.

Technical Specifications

MEM-CO

Manufacturer Part Number

1/2FLB3-1/2 

Type

FNPT x Barbed, Brass, Beaded Barb 

Technical Documents

No technical documents available for this product.

Request documentation →

Not sure this is the right part? Get a recommendation.

Ask a question

Request a Quote

Ask a question

MEM-CO Products

3G Electric (S) Pte. Ltd. — Singapore

Product Description

The MEM-CO Barbed Fitting Elbow is a standard brass barbed tube fitting with a 1/2 in pipe connection and 5/32 in ID size. It features an FNPT x Barbed, Brass, Beaded Barb design (MPN 1/2FLB3-1/2).

Frequently Asked Questions

What is the MEM-CO Barbed Fitting Elbow used for?

The MEM-CO Barbed Fitting Elbow connects 5/32 in ID tubing to a 1/2 in FNPT pipe port in pneumatic, fluid transfer, or low-pressure air systems. It is commonly used in industrial instrumentation, lubrication lines, and control circuits where a reliable brass fitting is required.

What are the specifications of the MEM-CO 1/2FLB3-1/2 barbed elbow?

This MEM-CO barbed elbow has a 1/2 in FNPT female thread on one end and a 5/32 in ID beaded barb on the other. It is made of brass with a beaded barb design for secure tube retention. The manufacturer part number is 1/2FLB3-1/2.

Where to buy MEM-CO barbed fittings in worldwide?

3G Electric supplies MEM-CO barbed fittings worldwide. We interpret your demand, source the genuine part, and handle logistics and customs clearance for delivery to your facility. Contact us for a quote on the MEM-CO 1/2FLB3-1/2 or other brass tube fittings.

How to install a MEM-CO brass barbed elbow?

To install the MEM-CO barbed elbow, apply thread sealant to the 1/2 in FNPT port and tighten with a wrench. Push the 5/32 in ID tubing fully onto the beaded barb until seated. For secure retention, use a hose clamp on the barb if system pressure exceeds 1.5 bar.

Not sure this is the right part? Photo-identify it→