MEM-CO Nickel-Plated Brass Barbed Tube Fitting Elbow
The MEM-CO Barbed Fitting Elbow (MPN 1/8FLB1-NP) is a nickel-plated brass barbed tube fitting with a 1/8 in FNPT pipe connection and a 11/64 in ID beaded barb. This elbow configuration is designed for secure tubing…
SKU 3G-OTH-465342
Also listed as: 18FLB1NP · 1 8FLB1 NP · 1-8FLB1-NP
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The MEM-CO Barbed Fitting Elbow (MPN 1/8FLB1-NP) is a nickel-plated brass barbed tube fitting with a 1/8 in FNPT pipe connection and a 11/64 in ID beaded barb. This elbow configuration is designed for secure tubing attachment in fluid or pneumatic systems.
Frequently Asked Questions
What is the MEM-CO Barbed Fitting Elbow used for?
The MEM-CO Barbed Fitting Elbow connects 11/64 in ID tubing to a 1/8 in FNPT port in fluid or pneumatic systems. Its nickel-plated brass construction resists corrosion, making it suitable for industrial air, water, or low-pressure oil lines where a secure, leak-resistant joint is needed.
What are the specifications of the MEM-CO 1/8FLB1-NP?
This MEM-CO elbow fitting has a 1/8 in FNPT female thread on one end and a 11/64 in ID beaded barb on the other. It is made of nickel-plated brass in an elbow configuration. The beaded barb design helps grip flexible tubing for a reliable seal in pneumatic or fluid transfer applications.
Where to buy MEM-CO barbed fittings in worldwide?
3G Electric supplies MEM-CO barbed fittings like the 1/8FLB1-NP to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote on this nickel-plated brass elbow or other industrial fittings from our broad sourcing network.
How to install a MEM-CO barbed fitting elbow?
To install the MEM-CO 1/8FLB1-NP, apply thread sealant to the 1/8 in FNPT port and tighten the elbow into the mating male pipe thread. Then push the 11/64 in ID tubing fully onto the beaded barb until seated. For secure retention, use a hose clamp over the barb if system pressure exceeds 1.5 bar.
MEM-CO Products
3G Electric supplies MEM-CO nickel-plated brass barbed tube fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
