MILLER ELECTRIC Push Roll: 0.035 in, V-Knurl
The MILLER ELECTRIC Push Roll (0.035 in) is a drive roll designed for Miller Spoolmate series spool guns, including the Spoolmate 3545. This V-Knurl roll is intended for use with flux-cored wire, with a manufacturer…
SKU 3G-OTH-353572
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The MILLER ELECTRIC Push Roll (0.035 in) is a drive roll designed for Miller Spoolmate series spool guns, including the Spoolmate 3545. This V-Knurl roll is intended for use with flux-cored wire, with a manufacturer part number of 186414.
Frequently Asked Questions
What is the MILLER ELECTRIC Push Roll 186414 used for?
The MILLER ELECTRIC Push Roll 186414 is a V-Knurl drive roll designed for Miller Spoolmate series spool guns, including the Spoolmate 3545. It is specifically used to feed flux-cored wire of 0.035 in diameter during MIG welding, ensuring consistent wire delivery for industrial fabrication and repair applications.
What are the specifications of the MILLER ELECTRIC Push Roll 186414?
The MILLER ELECTRIC Push Roll 186414 is a V-Knurl drive roll for 0.035 in flux-cored wire. It is compatible with Miller Spoolmate 100, 185, 200, 3035, and 3545 series spool guns. The manufacturer part number is 186414, and it is designed for use with the Spoolmate 3545 MIG gun series.
Where to buy the MILLER ELECTRIC Push Roll 186414 worldwide?
You can source the MILLER ELECTRIC Push Roll 186414 through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time; we supply genuine Miller parts to support your welding operations.
How to install the MILLER ELECTRIC Push Roll 186414 on a Spoolmate gun?
To install the MILLER ELECTRIC Push Roll 186414, first disconnect power and remove the spool gun cover. Loosen the retaining screw, slide out the old roll, and align the new V-Knurl roll with the drive shaft. Tighten the screw securely, ensuring the wire groove matches your 0.035 in flux-cored wire. Reassemble and test feed before welding.
Used in
Common applications for MILLER ELECTRICMILLER ELECTRIC Products
3G Electric supplies MILLER ELECTRIC drive rolls for miller spool guns. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
You might also need
Related products
- YANKEE YANKEE Chucking Reamer: 0.5938 in Dia, 19/32 in, Spiral Flute, High Speed Steel, MT1 Shank (MPN 437-19/32)
- TECHNIKS TECHNIKS Collet: ER32, 20 mm (MPN 04232-20)
- YANKEE YANKEE Chucking Reamer: 0.625 in Dia, 5/8 in, Spiral Flute, High Speed Steel, MT2 Shank (MPN 437-5/8)
- YANKEE YANKEE Chucking Reamer: 0.3125 in Dia, 5/16 in, Spiral Flute, High Speed Steel, MT1 Shank (MPN 437-5/16)
- YANKEE YANKEE Chucking Reamer: 0.6875 in Dia, 11/16 in, Spiral Flute, High Speed Steel, MT2 Shank (MPN 437-11/16)
- YANKEE YANKEE Chucking Reamer: 0.25 in Dia, 1/4 in, Spiral Flute, High Speed Steel, MT1 Shank (MPN 437-1/4)
