MURRELEKTRONIK Single-Ended Cordset with PUR Jacket
The MURRELEKTRONIK Cordset is a single-ended cordset with a PUR jacket for twisting applications, featuring an M12 male straight connector on one end and bare wire on the other. It has 4 pins, a 22 AWG wire size, a…
SKU 3G-OTH-51661
Also listed as: 7000120212341000 · 7000 12021 2341000
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The MURRELEKTRONIK Cordset is a single-ended cordset with a PUR jacket for twisting applications, featuring an M12 male straight connector on one end and bare wire on the other. It has 4 pins, a 22 AWG wire size, a gray PUR cable jacket, and an IP66K rating. The cordset supports a maximum current of 4 A and comes with a 10 m cable length.
Frequently Asked Questions
What is the MURRELEKTRONIK 7000-12021-2341000 cordset used for?
This single-ended cordset connects sensors or actuators in industrial automation, packaging, and robotics. Its PUR jacket resists oils, abrasion, and twisting, making it suitable for moving cable tracks or robotic arms. The M12 male connector plugs into compatible devices, while the bare-wire end terminates in a control cabinet.
What are the specifications of the MURRELEKTRONIK 7000-12021-2341000 cordset?
This MURRELEKTRONIK cordset has an M12 male straight connector to bare wire, 4 pins, 22 AWG wire, gray PUR jacket, 10 m cable length, 4 A max current, and IP66K rating. It is designed for twisting applications and resists moisture and dust ingress.
Where to buy the MURRELEKTRONIK 7000-12021-2341000 cordset worldwide?
3G Electric supplies this MURRELEKTRONIK cordset worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time; we source and deliver to any country.
How to install the MURRELEKTRONIK M12 cordset with bare wire?
Strip the bare-wire end to the recommended length (typically 6–8 mm) and terminate into a screw terminal or spring clamp in your junction box. Tighten the M12 connector by hand until snug, then secure with a wrench to the specified torque. Avoid sharp bends near the connector to maintain IP66K sealing.
Used in
Common applications for MURRELEKTRONIKMURRELEKTRONIK Products
3G Electric supplies MURRELEKTRONIK single-ended cordsets with pur jacket for twisting applications. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
