MURRELEKTRONIK Cordset: M12 Female Right Angle X Bare Wire, 4 Pins, Yellow, PUR, 5 m Cable Lg
The MURRELEKTRONIK Cordset is a single-ended cordset with a PUR jacket for twisting applications, featuring an M12 female right-angle connector on one end and bare wire on the other. It has 4 pins, a 5 m cable…
SKU 3G-OTH-52817
Need installation or engineering help?
Ask a question
Product Description
The MURRELEKTRONIK Cordset is a single-ended cordset with a PUR jacket for twisting applications, featuring an M12 female right-angle connector on one end and bare wire on the other. It has 4 pins, a 5 m cable length, 22 AWG wire size, a yellow PUR jacket, and an IP67 rating, with a maximum current of 4 A.
Frequently Asked Questions
What is the MURRELEKTRONIK 7000-12341-0340500 cordset used for?
This MURRELEKTRONIK cordset is used for connecting sensors and actuators in industrial automation, particularly in twisting or flexing cable applications. Its M12 female right-angle connector and bare-wire end suit tight spaces, while the PUR jacket resists oils and abrasion. The IP67 rating allows use in wet or dusty factory-floor environments.
What are the specifications of the MURRELEKTRONIK 7000-12341-0340500 cordset?
This MURRELEKTRONIK cordset has 4 pins, a 5 m cable length, 22 AWG wire size, and a yellow PUR jacket. It features an M12 female right-angle connector on one end and bare wire on the other, with a maximum current of 4 A and an IP67 rating. The part number is 7000-12341-0340500.
Where to buy the MURRELEKTRONIK 7000-12341-0340500 cordset worldwide?
3G Electric supplies the MURRELEKTRONIK 7000-12341-0340500 cordset worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time; we source and deliver this cordset to any country.
How to install the MURRELEKTRONIK M12 cordset with bare wire?
To install, connect the M12 female right-angle connector to the mating male port on your device, tightening the coupling nut by hand. Strip the bare-wire end to the recommended length (typically 6–8 mm) and terminate into a terminal block or connector. Ensure the cable is routed without sharp bends to maintain the IP67 seal.
Used in
Common applications for MURRELEKTRONIKMURRELEKTRONIK Products
3G Electric supplies MURRELEKTRONIK single-ended cordsets with pur jacket for twisting applications. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.















