NVENT CADDY Beam Clip with Conduit & Pipe Hanger
The NVENT CADDY Beam Clip with Conduit & Pipe Hanger (SKU 812M58SM, MPN 812M58SM) is a steel beam mount for conduit, pipe, and cable with a corrosion-resistant coated finish. It features a hammer-on mounting style…
SKU 3G-OTH-04555
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The NVENT CADDY Beam Clip with Conduit & Pipe Hanger (SKU 812M58SM, MPN 812M58SM) is a steel beam mount for conduit, pipe, and cable with a corrosion-resistant coated finish. It features a hammer-on mounting style, supports a 25 lb load capacity, and accommodates beam flange thicknesses from 5/16 in to 1/2 in. The clip rotates 360°, is compatible with 1/2 in and 3/4 in EMT conduit, and handles cable ODs from 0.709 in to 1.181 in. It is cULus listed and made in the USA.
Frequently Asked Questions
What is the NVENT CADDY Beam Clip with Conduit & Pipe Hanger used for?
The NVENT CADDY Beam Clip with Conduit & Pipe Hanger is used to mount conduit, pipe, and cable to steel beams in commercial and industrial electrical installations. It supports EMT conduit in 1/2 in and 3/4 in trade sizes, handles cable ODs from 0.709 in to 1.181 in, and rotates 360° for flexible routing.
What are the specifications of the NVENT CADDY 812M58SM beam clip?
The NVENT CADDY 812M58SM beam clip has a 25 lb load capacity, fits beam flange thicknesses from 5/16 in to 1/2 in, and is compatible with 1/2 in and 3/4 in EMT conduit. It is made of steel with a corrosion-resistant coated finish, is cULus listed, and rotates 360°. Minimum cable OD is 0.709 in; maximum is 1.181 in.
Where to buy NVENT CADDY beam clips in worldwide?
You can source NVENT CADDY beam clips worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to any international destination. Contact us for availability and lead times on the 812M58SM or other NVENT CADDY products.
How to install the NVENT CADDY hammer-on beam clip?
To install the NVENT CADDY hammer-on beam clip, position it on the beam flange within the 5/16 in to 1/2 in thickness range and strike the top with a hammer until it snaps into place. Ensure the clip rotates freely 360° before attaching conduit or cable. Always follow local electrical codes and use appropriate personal protective equipment.
Used in
Common applications for NVENT CADDYNVENT CADDY Products
3G Electric supplies NVENT CADDY beam mounts for conduit, pipe & cable. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
