NVENT CADDY Beam Clamp: Iron, 1/8 in to 3/8 in, 3/8" Thread Size, 2 1/16 in Overall Lg
The NVENT CADDY Beam Clamp: Iron (SKU 3G-OTH-04639) is a clamp-on beam, wire rod, and purlin clamp designed for use with 3/8 in threaded rod. It features an iron construction with an electroplated finish, a load…
SKU 3G-OTH-04639
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The NVENT CADDY Beam Clamp: Iron (SKU 3G-OTH-04639) is a clamp-on beam, wire rod, and purlin clamp designed for use with 3/8 in threaded rod. It features an iron construction with an electroplated finish, a load capacity of 250 lb, and accommodates beam flange thicknesses from 1/8 in to 3/8 in. The clamp has an overall length of 2-1/16 in, width of 1 in, and height of 1-3/16 in, and is cULus listed.
Frequently Asked Questions
What is the NVENT CADDY beam clamp used for?
The NVENT CADDY beam clamp (MPN CRLB37EG) is used to attach 3/8 in threaded rod to iron beams with flange thicknesses from 1/8 in to 3/8 in. It supports loads up to 250 lb and is commonly applied in electrical, plumbing, and mechanical support systems for hanging conduit, pipe, or equipment.
What are the specifications of the NVENT CADDY beam clamp?
The NVENT CADDY beam clamp (CRLB37EG) has a 3/8 in thread size, 250 lb load capacity, and fits beam flanges 1/8 in to 3/8 in thick. It is made of iron with an electroplated finish, measures 2-1/16 in long by 1 in wide by 1-3/16 in high, and is cULus listed.
Where to buy the NVENT CADDY beam clamp worldwide?
3G Electric supplies the NVENT CADDY beam clamp (CRLB37EG) to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to order this clamp for your beam, wire rod, or purlin mounting needs.
How to install the NVENT CADDY beam clamp?
To install the NVENT CADDY beam clamp, position it on the beam flange (1/8 in to 3/8 in thick) and tighten the clamp-on mechanism. Insert a 3/8 in threaded rod through the clamp's threaded hole. Ensure the load does not exceed 250 lb. Always follow manufacturer guidelines and local codes for safe installation.
Used in
Common applications for NVENT CADDYNVENT CADDY Products
3G Electric supplies NVENT CADDY beam, wire rod & purlin clamps. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
