PANDUIT BS14-M Non-Insulated Butt Splice Connector
The PANDUIT Butt Splice Connector (MPN BS14-M) is a non-insulated butt splice connector designed for wire sizes 16 AWG to 14 AWG, rated for 2,000 V, and supplied in a pack quantity of 1,000. This bare connector from…
SKU 3G-OTH-18340
Also listed as: BS14M · BS14 M
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The PANDUIT Butt Splice Connector (MPN BS14-M) is a non-insulated butt splice connector designed for wire sizes 16 AWG to 14 AWG, rated for 2,000 V, and supplied in a pack quantity of 1,000. This bare connector from PANDUIT provides a reliable electrical connection for industrial wiring applications.
Frequently Asked Questions
What is a PANDUIT BS14-M butt splice connector used for?
The PANDUIT BS14-M is a non-insulated butt splice connector used to join two 16 AWG to 14 AWG wires in industrial electrical systems. It is rated for 2,000 V and is commonly applied in control panels, machinery wiring, and power distribution where a reliable, permanent splice is required.
What are the specifications of the PANDUIT BS14-M butt splice connector?
The PANDUIT BS14-M is a bare (non-insulated) butt splice connector for wire sizes 16 AWG to 14 AWG. It has a voltage rating of 2,000 V and is sold in packs of 1,000 pieces. The manufacturer part number is BS14-M, and it is designed for crimp termination in industrial environments.
Where to buy PANDUIT BS14-M butt splice connectors worldwide?
3G Electric supplies the PANDUIT BS14-M butt splice connector to customers worldwide. As a global industrial sourcing partner, we handle full logistics, customs clearance, and delivery to your facility. Contact us for pricing and lead time on this 16 AWG – 14 AWG, 2,000 V connector.
How to install a PANDUIT BS14-M butt splice connector?
To install the PANDUIT BS14-M, strip approximately 3/8 inch of insulation from each wire end, insert both wires into the barrel, and crimp using a tool matched to 16–14 AWG non-insulated terminals. Ensure the crimp is secure and the splice is protected from moisture if used in wet locations.
Used in
Common applications for PANDUITPANDUIT Products
3G Electric supplies PANDUIT non-insulated butt splice connectors. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.