PARGRIP PFA Compression Tube Fitting Cap, 1/4 in OD, GCAP-4
The PARGRIP Compression Fitting Cap (MPN GCAP-4) is a PFA compression tube fitting with a 1/4 in OD size, from the Pargrip series. This FDA-approved cap is designed for use in compression fittings, providing a secure…
SKU 3G-OTH-474267
Also listed as: GCAP4 · GCAP 4
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The PARGRIP Compression Fitting Cap (MPN GCAP-4) is a PFA compression tube fitting with a 1/4 in OD size, from the Pargrip series. This FDA-approved cap is designed for use in compression fittings, providing a secure seal for tubing systems.
Frequently Asked Questions
What is the PARGRIP Compression Fitting Cap GCAP-4 used for?
The PARGRIP GCAP-4 is a PFA compression fitting cap used to seal the end of a compression fitting in tubing systems. It is commonly applied in pharmaceutical, food processing, and chemical handling where FDA-approved materials are required for purity and corrosion resistance.
What are the specifications of the PARGRIP GCAP-4?
The PARGRIP GCAP-4 is a PFA compression fitting cap with a 1/4 in OD size, from the Pargrip series. It is FDA Approved and manufactured by PARGRIP under MPN GCAP-4. The cap is designed for compression-type fittings to provide a secure, leak-resistant seal.
Where to buy PARGRIP GCAP-4 compression fitting cap worldwide?
3G Electric supplies the PARGRIP GCAP-4 compression fitting cap worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your location. Contact us to source this FDA-approved PFA cap for your tubing system needs.
How to install a PARGRIP compression fitting cap?
To install the PARGRIP GCAP-4 cap, first ensure the tubing end is cut square and free of burrs. Slide the cap onto the fitting body and tighten the nut finger-tight, then use a wrench for an additional 1/4 to 1/2 turn. Avoid over-tightening to prevent damage to the PFA material.
PARGRIP Products
3G Electric supplies PARGRIP pfa compression tube fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
