PARKER Standard Sleeve Brass Compression Fitting
The PARKER Compression Fitting Adapter (MPN 0102 18 00) is a standard sleeve brass compression fitting with an 18 mm OD x 18 mm OD fitting size and a Compression x Compression type. This adapter is part of our broad…
SKU 3G-OTH-482199
Also listed as: 01021800 · 0102-18-00
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The PARKER Compression Fitting Adapter (MPN 0102 18 00) is a standard sleeve brass compression fitting with an 18 mm OD x 18 mm OD fitting size and a Compression x Compression type. This adapter is part of our broad industrial supply across 14 departments, with specialist depth in combustion, pumps, and controls ensuring we can source and support your fluid system needs.
Frequently Asked Questions
What is a PARKER compression fitting adapter used for?
A PARKER compression fitting adapter connects two 18 mm OD tubes in fluid systems, providing a leak-tight seal without welding or soldering. It is commonly used in pneumatic, hydraulic, and instrumentation applications across industries like manufacturing, oil and gas, and chemical processing.
What are the specifications of the PARKER 0102 18 00 compression fitting?
The PARKER 0102 18 00 is a standard sleeve brass compression fitting adapter with a Compression x Compression type. It has an 18 mm OD x 18 mm OD fitting size and is manufactured by PARKER. This adapter is suitable for connecting two tubes of equal outer diameter in fluid systems.
Where to buy PARKER compression fittings in worldwide?
3G Electric supplies PARKER compression fittings like the 0102 18 00 to customers worldwide. We handle full logistics, customs clearance, and delivery to your location. As a global industrial solutions provider, we source and deliver genuine PARKER parts for fluid system needs across 14 departments.
How to install a PARKER compression fitting adapter?
To install a PARKER compression fitting adapter, slide the nut and sleeve onto the tube, insert the tube fully into the fitting body, then tighten the nut by hand. Use a wrench to tighten further until the sleeve grips the tube. Avoid overtightening to prevent damage. Always follow manufacturer guidelines for torque and tube preparation.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER standard sleeve brass compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
