PARKER Standard Sleeve Brass Compression Tee Fitting
The PARKER Compression Tee Fitting (MPN 0103 08 13) is a standard sleeve brass compression fitting with a 1/4 in pipe x 8 mm OD x 8 mm OD configuration. This tee fitting is designed for connecting three tubing lines…
SKU 3G-OTH-481988
Also listed as: 01030813 · 0103-08-13
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The PARKER Compression Tee Fitting (MPN 0103 08 13) is a standard sleeve brass compression fitting with a 1/4 in pipe x 8 mm OD x 8 mm OD configuration. This tee fitting is designed for connecting three tubing lines in industrial fluid systems, leveraging PARKER's engineering for reliable sealing and flow control.
Frequently Asked Questions
What is the PARKER Compression Tee Fitting 0103 08 13 used for?
This PARKER brass compression tee fitting connects three tubing lines in industrial fluid systems, such as pneumatic or hydraulic circuits. It provides reliable sealing and flow control for applications requiring a 1/4 in pipe and 8 mm OD tube branch.
What are the specifications of the PARKER 0103 08 13 tee fitting?
The PARKER 0103 08 13 is a standard sleeve brass compression tee fitting. It has a 1/4 in pipe x 8 mm OD x 8 mm OD fitting size. The manufacturer part number is 0103 08 13, and it is made of brass for durability in fluid systems.
Where to buy the PARKER 0103 08 13 compression tee fitting worldwide?
3G Electric supplies the PARKER 0103 08 13 compression tee fitting worldwide. We handle full logistics, customs clearance, and delivery to your location. Contact us to source this brass fitting for your industrial fluid system needs.
How to install a PARKER brass compression tee fitting?
To install a PARKER brass compression tee fitting, cut tubing squarely, deburr, and slide the nut and sleeve onto each tube end. Insert tubes into the fitting body, tighten nuts finger-tight, then wrench-tighten per manufacturer torque specs. Always pressure-test after assembly.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER standard sleeve brass compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
