PARKER Standard Sleeve Brass Compression Tee Fitting
The PARKER Compression Tee Fitting (MPN 0108 10 17) is a standard sleeve brass compression fitting designed for 10 mm OD x 10 mm OD x 3/8 in pipe connections. This brass fitting enables reliable branching in tubing…
SKU 3G-OTH-482133
Also listed as: 01081017 · 0108-10-17
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The PARKER Compression Tee Fitting (MPN 0108 10 17) is a standard sleeve brass compression fitting designed for 10 mm OD x 10 mm OD x 3/8 in pipe connections. This brass fitting enables reliable branching in tubing systems, supporting straightforward installation and secure sealing.
Frequently Asked Questions
What is a PARKER compression tee fitting used for?
A PARKER compression tee fitting is used to branch a tubing line into two separate runs in pneumatic, hydraulic, or instrumentation systems. The brass construction resists corrosion, and the standard sleeve design creates a reliable, leak-free seal on 10 mm OD tubing and 3/8 in pipe connections.
What are the specifications of the PARKER 0108 10 17 compression tee?
The PARKER 0108 10 17 is a standard sleeve brass compression tee fitting. It connects 10 mm OD tubing on two ports and a 3/8 in pipe thread on the third port. The brass body provides durability in industrial fluid and gas applications. The manufacturer part number is 0108 10 17.
Where to buy PARKER compression tee fittings worldwide?
3G Electric supplies PARKER compression tee fittings worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial sourcing partner, we interpret your demand and provide the right fitting for your application. Contact us for availability and lead time.
How to install a PARKER brass compression tee fitting?
To install a PARKER brass compression tee, cut tubing squarely, deburr the ends, and slide the nut and sleeve onto the tube. Insert the tube fully into the fitting body, then tighten the nut by hand followed by a wrench turn per manufacturer guidelines. Over-tightening can damage the sleeve or tube.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER standard sleeve brass compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
