PARKER 12-12 EBZ-B Single-Ferrule Brass Compression Fitting Elbow
The PARKER Compression Fitting Elbow (MPN 12-12 EBZ-B) is a single-ferrule brass compression fitting with a 3/4 in OD x 3/4 in OD size, compression x compression type, part of the CPI™ series. 3G Electric interprets…
SKU 3G-OTH-598462
Also listed as: 1212EBZB · 12 12 EBZ B · 12-12-EBZ-B
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The PARKER Compression Fitting Elbow (MPN 12-12 EBZ-B) is a single-ferrule brass compression fitting with a 3/4 in OD x 3/4 in OD size, compression x compression type, part of the CPI™ series. 3G Electric interprets your demand for this OEM-sourced component and delivers it with specialist support across 14 industrial departments, including combustion, pumps, and controls.
Frequently Asked Questions
What is a PARKER CPI compression fitting elbow used for?
The PARKER CPI compression fitting elbow (12-12 EBZ-B) connects two 3/4 in OD tubes at a 90° angle in instrumentation and process systems. Its single-ferrule brass design provides reliable, leak-tight seals in pneumatic, hydraulic, and chemical applications where space is limited.
What are the specifications of the PARKER 12-12 EBZ-B compression fitting?
This PARKER compression fitting elbow has a 3/4 in OD x 3/4 in OD size, compression x compression type, and is made of brass. It is part of the CPI series (CPI trademark) and uses a single-ferrule design for secure tube connections in high-pressure systems.
Where to buy PARKER compression fittings worldwide?
3G Electric supplies the PARKER CPI compression fitting elbow (12-12 EBZ-B) to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote and lead time on this OEM-sourced component.
How to install a single-ferrule brass compression fitting?
To install a PARKER CPI single-ferrule fitting, slide the nut and ferrule onto the tube, insert the tube fully into the fitting body, then tighten the nut by hand. Use a wrench to tighten an additional 1/4 to 1/2 turn for a leak-free seal. Avoid overtightening to prevent tube damage.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER single-ferrule brass compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
