PARKER 159F-4-4 Standard Brass 45-Degree Flare Tube Fitting Elbow
The Parker 159F-4-4 is a standard brass 45-degree flare tube fitting elbow, supplied as a 10-pack. It connects 1/4 in OD tubing to a 1/4 in pipe thread, with a flared/threaded design meeting SAE J513 standards. 3G…
SKU 3G-OTH-652336
Also listed as: 159F44 · 159F 4 4
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The Parker 159F-4-4 is a standard brass 45-degree flare tube fitting elbow, supplied as a 10-pack. It connects 1/4 in OD tubing to a 1/4 in pipe thread, with a flared/threaded design meeting SAE J513 standards. 3G Electric interprets this demand and delivers genuine industrial fittings across 14 departments, with specialist depth in combustion, pumps and controls as an authorised distributor.
Frequently Asked Questions
What is the Parker 159F-4-4 flared fitting elbow used for?
The Parker 159F-4-4 is a standard brass 45-degree flare tube fitting elbow used to connect 1/4 in OD tubing to a 1/4 in pipe thread in hydraulic and pneumatic systems. It is commonly applied in industrial fluid power, instrumentation, and general plumbing circuits requiring a leak-tight flared joint.
What are the specifications of the Parker 159F-4-4?
The Parker 159F-4-4 is a brass 45-degree flared/threaded elbow fitting. It has a 1/4 in OD tube size and 1/4 in pipe thread size, supplied as a 10-pack. It meets SAE J513 standards for flare tube fittings, ensuring dimensional and performance consistency in industrial applications.
Where to buy Parker 159F-4-4 in worldwide?
3G Electric supplies the Parker 159F-4-4 flared fitting elbow to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your location. Contact us to source this genuine Parker fitting for your project.
How to install a Parker flared fitting elbow?
To install a Parker flared fitting elbow, first cut the tubing square and deburr the end. Slide the flare nut onto the tubing, then use a flaring tool to create a 45-degree flare per SAE J513. Tighten the nut onto the fitting body with a wrench until snug. Avoid over-tightening to prevent damage.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER standard brass 45-degree flare tube fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
