PARKER Compression Tee Fitting: 1/8 in OD x 1/8 in OD x 1/8 in OD Fitting Size, Brass
PARKER Compression Tee Fitting, a standard sleeve brass compression fitting, is supplied in a 10-pack (MPN 164C-2). It accommodates 1/8 in OD x 1/8 in OD x 1/8 in OD fitting sizes, providing a reliable connection…
SKU 3G-OTH-482205
Also listed as: 164C2 · 164C 2
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
PARKER Compression Tee Fitting, a standard sleeve brass compression fitting, is supplied in a 10-pack (MPN 164C-2). It accommodates 1/8 in OD x 1/8 in OD x 1/8 in OD fitting sizes, providing a reliable connection point in tubing systems.
Frequently Asked Questions
What is a PARKER compression tee fitting used for?
A PARKER compression tee fitting creates a leak-resistant branch connection in low-pressure tubing systems. It joins three 1/8 in OD tubes, commonly used in instrumentation, pneumatic controls, and fluid-handling circuits where a reliable brass fitting is required.
What are the specifications of the PARKER 164C-2 compression tee?
The PARKER 164C-2 is a standard sleeve brass compression tee fitting. It accommodates 1/8 in OD x 1/8 in OD x 1/8 in OD tubing and is supplied in a 10-pack. The brass construction resists corrosion and provides a secure seal in low-pressure applications.
Where to buy PARKER compression tee fittings worldwide?
3G Electric supplies PARKER compression tee fittings worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on the 164C-2 10-pack. We source genuine industrial components across 14 departments.
How to install a PARKER brass compression tee fitting?
Cut tubing square, deburr, and slide the nut and sleeve onto the tube. Insert the tube fully into the PARKER tee body, then tighten the nut by hand plus 1-1/4 turns with a wrench. Avoid overtightening to prevent sleeve deformation. Always check for leaks after pressurization.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER standard sleeve brass compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
