PARKER Standard Sleeve Brass Compression Fitting, 164C-6, 10 PK
The PARKER Compression Tee Fitting (MPN 164C-6) is a standard sleeve brass compression fitting with 3/8 in OD x 3/8 in OD x 3/8 in OD fitting size, supplied in a 10-pack. This brass fitting is designed for connecting…
SKU 3G-OTH-482077
Also listed as: 164C6 · 164C 6
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The PARKER Compression Tee Fitting (MPN 164C-6) is a standard sleeve brass compression fitting with 3/8 in OD x 3/8 in OD x 3/8 in OD fitting size, supplied in a 10-pack. This brass fitting is designed for connecting three tubes of equal outer diameter in a tee configuration.
Frequently Asked Questions
What is a PARKER compression tee fitting used for?
A PARKER compression tee fitting connects three tubes of equal outer diameter in a tee configuration. It is commonly used in industrial fluid systems, instrumentation, and pneumatic lines where a leak-tight, reusable joint is required without soldering or welding.
What are the specifications of the PARKER 164C-6 compression tee fitting?
The PARKER 164C-6 is a standard sleeve brass compression tee fitting with a 3/8 in OD x 3/8 in OD x 3/8 in OD fitting size. It is supplied in a 10-pack and is designed for connecting three tubes of equal outer diameter in a tee configuration.
Where to buy PARKER compression tee fittings worldwide?
3G Electric supplies PARKER compression tee fittings worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to deliver genuine PARKER fittings to your facility. Contact us for a quote on the 164C-6 10-pack.
How to install a PARKER compression tee fitting?
To install a PARKER compression tee fitting, cut the tube squarely, deburr the end, and slide the nut and ferrule onto the tube. Insert the tube into the fitting body until it seats, then tighten the nut by hand followed by a wrench turn per manufacturer guidelines. Do not overtighten.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER standard sleeve brass compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
