PARKER Standard Sleeve Brass Compression Fitting, 3/4 in OD, 5-Pack (165C-12)
The PARKER Compression Fitting Elbow (MPN 165C-12) is a standard sleeve brass compression fitting with 3/4 in OD x 3/4 in OD fitting size, supplied in a 5-pack. This component is part of our broader industrial…
SKU 3G-OTH-481961
Also listed as: 165C12 · 165C 12
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The PARKER Compression Fitting Elbow (MPN 165C-12) is a standard sleeve brass compression fitting with 3/4 in OD x 3/4 in OD fitting size, supplied in a 5-pack. This component is part of our broader industrial solutions across 14 departments, with specialist depth in combustion, pumps and controls as an authorised distributor for brands including Parker, Schneider, ABB, Siemens, SKF, Festo, Fluke, Interpump and FBR.
Frequently Asked Questions
What is the PARKER 165C-12 compression fitting elbow used for?
The PARKER 165C-12 is a standard sleeve brass compression fitting elbow used to join two 3/4 in OD tubes at a 90-degree angle in industrial fluid or gas systems. It is commonly applied in instrumentation, hydraulic, and pneumatic lines where reliable, leak-free connections are required.
What are the specifications of the PARKER 165C-12 compression fitting elbow?
The PARKER 165C-12 is a brass compression fitting elbow with 3/4 in OD x 3/4 in OD fitting size, supplied in a 5-pack. It is a standard sleeve type, manufactured by Parker, with part number 165C-12. This fitting is designed for durable, leak-resistant connections in industrial piping systems.
Where to buy PARKER 165C-12 compression fitting elbow worldwide?
3G Electric supplies the PARKER 165C-12 compression fitting elbow worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your location. Contact us to source this genuine Parker fitting for your application.
How to install a PARKER brass compression fitting elbow?
To install the PARKER 165C-12, slide the nut and sleeve onto the tube, insert the tube fully into the fitting body, then tighten the nut by hand. Use a wrench to tighten an additional 1 to 1.25 turns for a secure seal. Avoid overtightening to prevent damage to the brass components.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER standard sleeve brass compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
