PARKER Standard Sleeve Brass Compression Fitting Elbow
The PARKER Compression Fitting Elbow (MPN 165C-2) is a standard sleeve brass compression fitting with 1/8 in OD x 1/8 in OD fitting size, supplied in a 10-pack. This product is a brass compression fitting elbow from…
SKU 3G-OTH-481964
Also listed as: 165C2 · 165C 2
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The PARKER Compression Fitting Elbow (MPN 165C-2) is a standard sleeve brass compression fitting with 1/8 in OD x 1/8 in OD fitting size, supplied in a 10-pack. This product is a brass compression fitting elbow from PARKER.
Frequently Asked Questions
What is the PARKER 165C-2 compression fitting elbow used for?
The PARKER 165C-2 is a brass compression fitting elbow used to connect two 1/8 in OD tubes at a 90-degree angle in pneumatic, hydraulic, or instrumentation systems. It provides a leak-tight seal without soldering or welding, ideal for industrial fluid and gas handling applications.
What are the specifications of the PARKER 165C-2 compression fitting elbow?
The PARKER 165C-2 is a standard sleeve brass compression fitting elbow with 1/8 in OD x 1/8 in OD fitting size. It comes in a 10-pack, with manufacturer part number 165C-2. The brass construction offers corrosion resistance and durability for low- to medium-pressure applications.
Where to buy PARKER 165C-2 compression fittings worldwide?
3G Electric supplies the PARKER 165C-2 compression fitting elbow worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your facility. Contact us to source this 10-pack of brass compression fittings for your project.
How to install a PARKER compression fitting elbow?
To install the PARKER 165C-2, slide the nut and sleeve onto the tube, insert the tube fully into the fitting body, then tighten the nut by hand. Use a wrench to tighten an additional 1 to 1.25 turns for a secure seal. Avoid overtightening to prevent tube deformation.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER standard sleeve brass compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
