PARKER Self-Aligning Brass Compression Fitting, 3/8 in OD x 3/8 in OD, 10 PK
The PARKER Compression Fitting Elbow is a self-aligning brass compression fitting with 3/8 in OD x 3/8 in OD fitting size, supplied in a 10-pack (MPN 165CA-6). This PARKER component is designed for connecting tubing…
SKU 3G-OTH-470655
Also listed as: 165CA6 · 165CA 6
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The PARKER Compression Fitting Elbow is a self-aligning brass compression fitting with 3/8 in OD x 3/8 in OD fitting size, supplied in a 10-pack (MPN 165CA-6). This PARKER component is designed for connecting tubing in industrial fluid systems.
Frequently Asked Questions
What is a PARKER compression fitting elbow used for?
A PARKER compression fitting elbow connects two tubes at a 90-degree angle in industrial fluid systems. It is commonly used in pneumatic, hydraulic, and instrumentation applications where a leak-tight, vibration-resistant joint is needed. The self-aligning brass design simplifies installation and ensures reliable sealing.
What are the specifications of the PARKER 165CA-6 compression fitting elbow?
The PARKER 165CA-6 is a self-aligning brass compression fitting elbow with 3/8 in OD x 3/8 in OD fitting size. It is supplied in a 10-pack. The manufacturer part number is 165CA-6. This component is designed for connecting tubing in industrial fluid systems.
Where to buy PARKER compression fittings worldwide?
3G Electric supplies PARKER compression fittings worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to deliver genuine PARKER components like the 165CA-6 elbow to your facility. Contact us for a quote and delivery timeline to your location.
How to install a PARKER compression fitting elbow?
To install a PARKER compression fitting elbow, slide the nut and ferrule onto the tube, insert the tube fully into the fitting, then tighten the nut by hand. Use a wrench for final tightening—typically 1/4 to 1/2 turn past hand-tight. Avoid over-tightening to prevent tube deformation. Always follow the manufacturer's instructions.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER self-aligning brass compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
