PARKER Self-Aligning Brass Compression Fitting, 3/16 in OD x 1/4 in MNPT, 10 PK
The PARKER Compression Fitting Elbow (MPN 169CA-3-4) is a self-aligning brass compression fitting with a 3/16 in OD x 1/4 in Pipe Fitting Size, configured as Compression x MNPT and sold in a 10-pack. This component…
SKU 3G-OTH-470657
Also listed as: 169CA34 · 169CA 3 4
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The PARKER Compression Fitting Elbow (MPN 169CA-3-4) is a self-aligning brass compression fitting with a 3/16 in OD x 1/4 in Pipe Fitting Size, configured as Compression x MNPT and sold in a 10-pack. This component is part of 3G Electric's curated industrial solutions, where we interpret demand and deliver genuine equipment across 14 departments—including pneumatics and instrumentation—with specialist depth in combustion, pumps, and controls as an authorised distributor for brands like PARKER, ensuring the right answer for your application.
Frequently Asked Questions
What is the PARKER 169CA-3-4 compression fitting elbow used for?
The PARKER 169CA-3-4 is a self-aligning brass compression fitting elbow used to connect 3/16 in OD tubing to a 1/4 in male NPT port in pneumatic and instrumentation systems. It provides a leak-tight seal without flaring or soldering, ideal for industrial fluid and air lines.
What are the specifications of the PARKER 169CA-3-4?
The PARKER 169CA-3-4 is a brass compression fitting elbow with a 3/16 in OD tube size and 1/4 in male NPT pipe thread. It is configured as Compression x MNPT, sold in a 10-pack. The self-aligning design simplifies installation in tight spaces.
Where to buy PARKER 169CA-3-4 compression fittings worldwide?
3G Electric supplies the PARKER 169CA-3-4 compression fitting elbow worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to deliver genuine PARKER components to your facility. Contact us for availability and lead time.
How to install a PARKER compression fitting elbow?
To install the PARKER 169CA-3-4, slide the nut and ferrule onto the tubing, insert the tube fully into the fitting body, then tighten the nut by hand followed by a wrench turn. Avoid over-tightening to prevent damage. Always verify the tube OD matches the 3/16 in fitting size.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER self-aligning brass compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
