PARKER 169CA-6-6 Self-Aligning Brass Compression Fitting Elbow
The PARKER Compression Fitting Elbow (MPN 169CA-6-6) is a self-aligning brass compression fitting with a 3/8 in OD x 3/8 in Pipe Fitting Size, configured as Compression x MNPT, supplied in a 25-pack. This product is…
SKU 3G-OTH-470665
Also listed as: 169CA66 · 169CA 6 6
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The PARKER Compression Fitting Elbow (MPN 169CA-6-6) is a self-aligning brass compression fitting with a 3/8 in OD x 3/8 in Pipe Fitting Size, configured as Compression x MNPT, supplied in a 25-pack. This product is part of 3G Electric's curated industrial solutions, where we interpret demand and deliver genuine equipment across 14 departments—with specialist depth in combustion, pumps, and controls as an authorized distributor.
Frequently Asked Questions
What is the PARKER 169CA-6-6 compression fitting elbow used for?
The PARKER 169CA-6-6 is a self-aligning brass compression fitting elbow used to connect 3/8 in OD tubing to a 3/8 in male NPT threaded port in pneumatic, hydraulic, and instrumentation systems. It provides a leak-tight seal without flaring or soldering, ideal for industrial fluid and gas handling applications.
What are the specifications of the PARKER 169CA-6-6 compression fitting?
The PARKER 169CA-6-6 is a brass compression fitting elbow with a 3/8 in OD tube size and 3/8 in male NPT pipe thread. It is configured as Compression x MNPT and supplied in a 25-pack. The self-aligning design simplifies installation in tight spaces. 3G Electric supplies this genuine PARKER part worldwide.
Where to buy PARKER 169CA-6-6 compression fittings worldwide?
3G Electric supplies the genuine PARKER 169CA-6-6 compression fitting elbow to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source and deliver this 25-pack of brass compression fittings to support your maintenance and project needs.
How to install a PARKER compression fitting elbow?
To install the PARKER 169CA-6-6, insert the tube fully into the fitting until it seats, then tighten the nut by hand followed by a wrench turn per manufacturer guidelines. Use thread sealant on the male NPT end. Avoid over-tightening to prevent damage. 3G Electric can provide technical support for proper installation.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER self-aligning brass compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
