PARKER Standard Sleeve Brass Compression Fitting
The PARKER Compression Tee Fitting (MPN 172C-6-2) is a standard sleeve brass compression fitting with a 3/8 in OD x 1/8 in Pipe x 3/8 in OD fitting size, supplied in a 10-pack. This OEM component is designed for…
SKU 3G-OTH-482263
Also listed as: 172C62 · 172C 6 2
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The PARKER Compression Tee Fitting (MPN 172C-6-2) is a standard sleeve brass compression fitting with a 3/8 in OD x 1/8 in Pipe x 3/8 in OD fitting size, supplied in a 10-pack. This OEM component is designed for connecting tubing in industrial fluid systems.
Frequently Asked Questions
What is the PARKER Compression Tee Fitting used for?
The PARKER Compression Tee Fitting (172C-6-2) connects three tubing branches in industrial fluid systems. It is commonly used in pneumatic, hydraulic, and instrumentation lines where a leak-tight, removable joint is needed. The brass construction resists corrosion in moderate-pressure applications.
What are the specifications of the PARKER 172C-6-2 fitting?
This PARKER compression tee fitting has a 3/8 in OD x 1/8 in Pipe x 3/8 in OD fitting size. It is made of brass and supplied in a 10-pack. The standard sleeve design provides reliable sealing on copper or plastic tubing in low-to-medium pressure fluid systems.
Where to buy PARKER compression fittings in worldwide?
3G Electric supplies PARKER compression fittings like the 172C-6-2 to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote on this 10-pack brass tee fitting or other industrial fluid system components.
How to install a PARKER compression tee fitting?
To install a PARKER compression tee fitting, cut tubing squarely, deburr the ends, and slide the nut and sleeve onto each tube. Insert the tube fully into the fitting body, then tighten the nut by hand followed by a wrench turn. Avoid overtightening to prevent sleeve deformation.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER standard sleeve brass compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
