PARKER Solid Hex Drive Plug, Carbon Steel, 1/8 in NPT, 9,700 psi
The PARKER Solid Hex Drive Plug (MPN 2 PH-S) is a threaded instrumentation extreme-pressure pipe fitting made from carbon steel, with a 1/8 in NPT connection and a maximum operating pressure of 9,700 psi. 3G Electric…
SKU 3G-OTH-474708
Also listed as: 2PHS · 2 PH S · 2-PH-S
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The PARKER Solid Hex Drive Plug (MPN 2 PH-S) is a threaded instrumentation extreme-pressure pipe fitting made from carbon steel, with a 1/8 in NPT connection and a maximum operating pressure of 9,700 psi. 3G Electric interprets this demand and delivers genuine PARKER fittings across 14 industrial departments — and we supply far more than is listed. Our specialist depth in combustion, pumps and controls serves as a trust anchor, ensuring you get the right answer for demanding applications.
Frequently Asked Questions
What is the PARKER 2 PH-S solid hex drive plug used for?
The PARKER 2 PH-S solid hex drive plug is used to seal ports in high-pressure instrumentation systems. It is a threaded extreme-pressure pipe fitting made from carbon steel, rated for 9,700 psi, and is commonly applied in hydraulic and pneumatic circuits where leak-free sealing is critical.
What are the specifications of the PARKER 2 PH-S plug?
The PARKER 2 PH-S is a carbon steel solid hex drive plug with a 1/8 in NPT thread. It has a maximum operating pressure of 9,700 psi and is designed for extreme-pressure instrumentation applications. The manufacturer part number is 2 PH-S.
Where to buy PARKER 2 PH-S in worldwide?
3G Electric supplies the genuine PARKER 2 PH-S solid hex drive plug to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source and deliver this fitting across 14 departments, including instrumentation and power transmission.
How to install a PARKER solid hex drive plug?
To install a PARKER solid hex drive plug, clean the NPT port threads and apply a compatible thread sealant. Hand-tighten the plug, then use a hex wrench to torque it to the manufacturer's recommended specification. Avoid over-tightening to prevent thread damage. Always verify pressure rating compatibility before installation.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER threaded instrumentation extreme-pressure pipe fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
