PARKER 264AB-8 Brass DOT Air Brake Compression Tee Fitting for Copper Lines
The PARKER Compression Tee Fitting (MPN 264AB-8) is a brass DOT Air Brake Compression Fitting for Copper Lines, sized at 1/2 in OD x 1/2 in OD x 1/2 in OD. This fitting is designed for use in air brake systems…
SKU 3G-OTH-468101
Also listed as: 264AB8 · 264AB 8
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The PARKER Compression Tee Fitting (MPN 264AB-8) is a brass DOT Air Brake Compression Fitting for Copper Lines, sized at 1/2 in OD x 1/2 in OD x 1/2 in OD. This fitting is designed for use in air brake systems, providing a reliable connection point for copper tubing.
Frequently Asked Questions
What is the PARKER 264AB-8 compression tee fitting used for?
The PARKER 264AB-8 is a brass DOT air brake compression tee fitting for copper lines. It creates a reliable branch connection in air brake systems, splitting one line into two while maintaining pressure integrity. Common in heavy trucks, trailers, and industrial braking applications.
What are the specifications of the PARKER 264AB-8 fitting?
The PARKER 264AB-8 is a brass compression tee fitting with three 1/2 in OD ports. It is designed for DOT air brake systems using copper tubing. The manufacturer part number is 264AB-8. This fitting provides a leak-resistant junction for pneumatic brake circuits.
Where to buy PARKER 264AB-8 compression tee fitting worldwide?
3G Electric supplies the PARKER 264AB-8 brass compression tee fitting worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial sourcing partner, we provide genuine PARKER fittings for air brake systems. Contact us for pricing and lead time.
How to install a PARKER compression tee fitting on copper air brake lines?
Cut copper tubing square, deburr, and slide the compression nut and ferrule onto each tube end. Insert tubes fully into the PARKER tee fitting ports, then tighten nuts evenly with a wrench. Avoid over-torquing to prevent brass damage. Always test the system for leaks after installation.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER dot air brake compression fittings for copper lines. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.