PARKER Self-Aligning Brass Compression Fitting
The PARKER Compression Tee Fitting (MPN 264CA-3) is a self-aligning brass compression fitting with a 3/16 in OD x 3/16 in OD x 3/16 in OD fitting size, supplied in a pack of 10. This component is designed for…
SKU 3G-OTH-470608
Also listed as: 264CA3 · 264CA 3
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The PARKER Compression Tee Fitting (MPN 264CA-3) is a self-aligning brass compression fitting with a 3/16 in OD x 3/16 in OD x 3/16 in OD fitting size, supplied in a pack of 10. This component is designed for connecting three tubes of equal outer diameter in a tee configuration, leveraging PARKER's engineering for reliable sealing in industrial fluid systems.
Frequently Asked Questions
What is the PARKER Compression Tee Fitting used for?
The PARKER Compression Tee Fitting (264CA-3) connects three tubes of equal 3/16 in OD in a tee configuration for industrial fluid systems. Its self-aligning brass design provides reliable sealing in pneumatic, hydraulic, and instrumentation applications where space is limited.
What are the specifications of the PARKER 264CA-3?
The PARKER 264CA-3 is a self-aligning brass compression tee fitting with a 3/16 in OD x 3/16 in OD x 3/16 in OD fitting size, supplied in a pack of 10. It is manufactured by PARKER under MPN 264CA-3 for connecting three tubes of equal outer diameter.
Where to buy PARKER compression tee fittings worldwide?
3G Electric supplies PARKER compression tee fittings worldwide, handling full logistics and customs clearance. As a global industrial solutions provider, we source and deliver genuine PARKER components like the 264CA-3 to any location. Contact us for availability and lead time.
How to install a PARKER brass compression tee fitting?
To install a PARKER brass compression tee fitting, ensure tube ends are clean and cut square. Slide the nut and ferrule onto each tube, insert tubes fully into the fitting body, and tighten nuts finger-tight plus 1-1/4 turns with a wrench. Avoid over-tightening to prevent damage.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER self-aligning brass compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
