PARKER 398P-4-4 Creep-Resistant Self-Aligning Brass Compression Fitting
The PARKER Compression Fitting Adapter (MPN 398P-4-4) is a creep-resistant self-aligning brass compression fitting, type Compression x FTG, with a 1/4 in OD x 1/4 in Pipe Fitting Size. 3G Electric interprets this…
SKU 3G-OTH-596319
Also listed as: 398P44 · 398P 4 4
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The PARKER Compression Fitting Adapter (MPN 398P-4-4) is a creep-resistant self-aligning brass compression fitting, type Compression x FTG, with a 1/4 in OD x 1/4 in Pipe Fitting Size. 3G Electric interprets this demand and sources the genuine PARKER component, backed by our specialist depth in controls and across 14 industrial departments.
Frequently Asked Questions
What is a PARKER compression fitting adapter used for?
A PARKER compression fitting adapter connects tubing to threaded ports in pneumatic, hydraulic, and instrumentation systems. The 398P-4-4 model joins 1/4 in OD tubing to a 1/4 in pipe thread, providing a leak-resistant seal in industrial fluid and gas lines.
What are the specifications of the PARKER 398P-4-4?
The PARKER 398P-4-4 is a creep-resistant self-aligning brass compression fitting. It has a Compression x FTG type, with a 1/4 in OD tube size and 1/4 in pipe fitting size. The manufacturer part number is 398P-4-4, and it is made by PARKER.
Where to buy PARKER compression fittings in worldwide?
3G Electric supplies genuine PARKER compression fittings worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source the exact PARKER 398P-4-4 adapter you need and coordinate international shipping.
How to install a PARKER compression fitting adapter?
To install a PARKER compression fitting, slide the nut and ferrule onto the tube, insert the tube fully into the fitting body, then tighten the nut by hand followed by a wrench turn per manufacturer guidelines. Avoid overtightening to prevent tube deformation. Always verify tube alignment before final torque.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER creep-resistant self-aligning brass compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
