PARKER Self-Aligning Brass Compression Fitting
The PARKER Compression Fitting Adapter (MPN 68CA-4-8) is a self-aligning brass compression fitting, type Compression x MNPT, supplied in a 10-pack. It accommodates a 1/4 in OD tube and a 1/2 in pipe fitting size…
SKU 3G-OTH-470576
Also listed as: 68CA48 · 68CA 4 8
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The PARKER Compression Fitting Adapter (MPN 68CA-4-8) is a self-aligning brass compression fitting, type Compression x MNPT, supplied in a 10-pack. It accommodates a 1/4 in OD tube and a 1/2 in pipe fitting size. This PARKER adapter provides a straightforward connection solution for industrial tubing and piping systems.
Frequently Asked Questions
What is the PARKER 68CA-4-8 compression fitting adapter used for?
The PARKER 68CA-4-8 is a self-aligning brass compression fitting adapter used to connect 1/4 in OD tubing to a 1/2 in male NPT threaded port. It is commonly applied in industrial pneumatic, hydraulic, and instrumentation systems where a leak-tight, vibration-resistant joint is required.
What are the specifications of the PARKER 68CA-4-8?
The PARKER 68CA-4-8 is a brass compression fitting adapter, type Compression x MNPT, supplied in a 10-pack. It fits 1/4 in OD tube and 1/2 in pipe size. The manufacturer part number is 68CA-4-8. This self-aligning design simplifies assembly in tight spaces.
Where to buy PARKER 68CA-4-8 compression fittings worldwide?
3G Electric supplies the PARKER 68CA-4-8 compression fitting adapter worldwide. As a global industrial sourcing partner, we handle logistics, customs clearance, and delivery to your site. Contact us for availability and lead time on this 10-pack of brass compression x MNPT adapters.
How to install a PARKER compression fitting adapter?
To install a PARKER compression fitting adapter, slide the nut and ferrule onto the tube, insert the tube fully into the fitting body, then tighten the nut by hand plus 1-1/4 turns with a wrench. Avoid overtightening. Always use a backup wrench on the fitting body to prevent stress on the connection.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER self-aligning brass compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
